[PATCH 18/20] ARM: dts: am43xx: add clkctrl nodes
From: Tero Kristo <hidden>
Date: 2017-12-07 08:46:51
Also in:
linux-omap
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add clkctrl nodes for AM43xx SoC. These are going to be acting as replacement for part of the existing clock data and the existing clkctrl hooks under hwmod data. This patch also removes any obsolete clock nodes, and reroutes all users for these to use the new clkctrl clocks instead. Signed-off-by: Tero Kristo <redacted> --- arch/arm/boot/dts/am4372.dtsi | 4 +- arch/arm/boot/dts/am43x-epos-evm.dts | 2 +- arch/arm/boot/dts/am43xx-clocks.dtsi | 230 +++++++++++------------------------ 3 files changed, 73 insertions(+), 163 deletions(-)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index bf4e58e..e9777df 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi@@ -998,7 +998,7 @@ reg = <0x483a8000 0x8000>; syscon-phy-power = <&scm_conf 0x620>; clocks = <&usb_phy0_always_on_clk32k>, - <&usb_otg_ss0_refclk960m>; + <&l4_per_clkctrl 0x240 8>; clock-names = "wkupclk", "refclk"; #phy-cells = <0>; status = "disabled";
@@ -1017,7 +1017,7 @@ reg = <0x483e8000 0x8000>; syscon-phy-power = <&scm_conf 0x628>; clocks = <&usb_phy1_always_on_clk32k>, - <&usb_otg_ss1_refclk960m>; + <&l4_per_clkctrl 0x248 8>; clock-names = "wkupclk", "refclk"; #phy-cells = <0>; status = "disabled";
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index a04d79e..d3363fb 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts@@ -985,7 +985,7 @@ rx-num-evt = <32>; }; -&synctimer_32kclk { +&mux_synctimer32k_ck { assigned-clocks = <&mux_synctimer32k_ck>; assigned-clock-parents = <&clkdiv32k_ick>; };
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index 430be58..a7037a4 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi@@ -524,54 +524,6 @@ reg = <0x4240>; }; - gpio0_dbclk: gpio0_dbclk@2b68 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&gpio0_dbclk_mux_ck>; - ti,bit-shift = <8>; - reg = <0x2b68>; - }; - - gpio1_dbclk: gpio1_dbclk@8c78 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ick>; - ti,bit-shift = <8>; - reg = <0x8c78>; - }; - - gpio2_dbclk: gpio2_dbclk@8c80 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ick>; - ti,bit-shift = <8>; - reg = <0x8c80>; - }; - - gpio3_dbclk: gpio3_dbclk@8c88 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ick>; - ti,bit-shift = <8>; - reg = <0x8c88>; - }; - - gpio4_dbclk: gpio4_dbclk@8c90 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ick>; - ti,bit-shift = <8>; - reg = <0x8c90>; - }; - - gpio5_dbclk: gpio5_dbclk@8c98 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ick>; - ti,bit-shift = <8>; - reg = <0x8c98>; - }; - mmc_clk: mmc_clk { #clock-cells = <0>; compatible = "fixed-factor-clock";
@@ -629,14 +581,6 @@ reg = <0x4230>; }; - synctimer_32kclk: synctimer_32kclk@2a30 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&mux_synctimer32k_ck>; - ti,bit-shift = <8>; - reg = <0x2a30>; - }; - timer8_fck: timer8_fck@421c { #clock-cells = <0>; compatible = "ti,mux-clock";
@@ -763,110 +707,76 @@ ti,bit-shift = <8>; reg = <0x2a48>; }; +}; - usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m@8a60 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll_per_clkdcoldo>; - ti,bit-shift = <8>; - reg = <0x8a60>; - }; - - usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m@8a68 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll_per_clkdcoldo>; - ti,bit-shift = <8>; - reg = <0x8a68>; - }; - - clkout1_osc_div_ck: clkout1_osc_div_ck { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&sys_clkin_ck>; - ti,bit-shift = <20>; - ti,max-div = <4>; - reg = <0x4100>; - }; - - clkout1_src2_mux_ck: clkout1_src2_mux_ck { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>, - <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>, - <&dpll_mpu_m2_ck>; - reg = <0x4100>; - }; - - clkout1_src2_pre_div_ck: clkout1_src2_pre_div_ck { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&clkout1_src2_mux_ck>; - ti,bit-shift = <4>; - ti,max-div = <8>; - reg = <0x4100>; - }; - - clkout1_src2_post_div_ck: clkout1_src2_post_div_ck { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&clkout1_src2_pre_div_ck>; - ti,bit-shift = <8>; - ti,max-div = <32>; - ti,index-power-of-two; - reg = <0x4100>; - }; - - clkout1_mux_ck: clkout1_mux_ck { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>, - <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>; - ti,bit-shift = <16>; - reg = <0x4100>; - }; - - clkout1_ck: clkout1_ck { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkout1_mux_ck>; - ti,bit-shift = <23>; - reg = <0x4100>; - }; - - clkout2_src_mux_ck: clkout2_src_mux_ck { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>, - <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>, - <&dpll_mpu_m2_ck>, <&dpll_extdev_ck>; - reg = <0x4108>; - }; - - clkout2_pre_div_ck: clkout2_pre_div_ck { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&clkout2_src_mux_ck>; - ti,bit-shift = <4>; - ti,max-div = <8>; - reg = <0x4108>; - }; - - clkout2_post_div_ck: clkout2_post_div_ck { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&clkout2_pre_div_ck>; - ti,bit-shift = <8>; - ti,max-div = <32>; - ti,index-power-of-two; - reg = <0x4108>; - }; - - clkout2_ck: clkout2_ck { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkout2_post_div_ck>; - ti,bit-shift = <16>; - reg = <0x4108>; +&prcm { + l4_wkup_cm: l4_wkup_cm@2800 { + compatible = "ti,omap4-cm"; + reg = <0x2800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2800 0x400>; + + l4_wkup_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x34c>; + #clock-cells = <2>; + }; + }; + + mpu_cm: mpu_cm@8300 { + compatible = "ti,omap4-cm"; + reg = <0x8300 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x8300 0x100>; + + mpu_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + gfx_l3_cm: gfx_l3_cm@8400 { + compatible = "ti,omap4-cm"; + reg = <0x8400 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x8400 0x100>; + + gfx_l3_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l4_rtc_cm: l4_rtc_cm@8500 { + compatible = "ti,omap4-cm"; + reg = <0x8500 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x8500 0x100>; + + l4_rtc_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l4_per_cm: l4_per_cm@8800 { + compatible = "ti,omap4-cm"; + reg = <0x8800 0xc00>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x8800 0xc00>; + + l4_per_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0xb04>; + #clock-cells = <2>; + }; }; };
--
1.9.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html