[PATCH v2 7/7] dt-bindings: tda998x: add the calibration gpio
From: Russell King <hidden>
Date: 2017-12-06 12:35:54
Also in:
dri-devel
Subsystem:
drm drivers, drm drivers and misc gpu patches, drm drivers for bridge chips, open firmware and flattened device tree bindings, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Andrzej Hajda, Neil Armstrong, Robert Foss, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2017-12-06 · Re: [PATCH v2 7/7] dt-bindings: tda998x: add the calibration gpio · Rob Herring <hidden>
Add the optional calibration gpio for integrated TDA9950 CEC support. This GPIO corresponds with the interrupt from the TDA998x, as the calibration requires driving the interrupt pin low. Signed-off-by: Russell King <redacted> --- Documentation/devicetree/bindings/display/bridge/tda998x.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt
index 24cc2466185a..1a4eaca40d94 100644
--- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt
+++ b/Documentation/devicetree/bindings/display/bridge/tda998x.txt@@ -27,6 +27,9 @@ Required properties; in question is used. The implementation allows one or two DAIs. If two DAIs are defined, they must be of different type. + - nxp,calib-gpios: calibration GPIO, which must correspond with the + gpio used for the TDA998x interrupt pin. + [1] Documentation/sound/alsa/soc/DAI.txt [2] include/dt-bindings/display/tda998x.h
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html