Thread (3 messages) 3 messages, 3 authors, 2017-12-18
STALE3115d

[PATCH v8] arm64: dts: meson-axg: switch uart_ao clock to CLK81

From: Yixun Lan <hidden>
Date: 2017-12-15 14:17:32
Also in: linux-amlogic, linux-arm-kernel, linux-clk, lkml
Subsystem: arm/amlogic meson soc support, the rest · Maintainers: Neil Armstrong, Kevin Hilman, Linus Torvalds

Switch the uart_ao pclk to CLK81 since the clock driver is ready.

Signed-off-by: Yixun Lan <redacted>

---
This is a fixup for the previous version

Changes in v8 since [1]
 - move clock DT info into soc.dtsi

[1]
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005741.html
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 01beb211f442..d1f8043be426 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-clkc.h>
 
 / {
 	compatible = "amlogic,meson-axg";
@@ -200,7 +201,7 @@
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 				reg = <0x0 0x3000 0x0 0x18>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
@@ -209,7 +210,7 @@
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 				reg = <0x0 0x4000 0x0 0x18>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
-- 
2.15.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help