[PATCH v3 1/3] regulator: axp20x: add drivevbus support for axp803
From: Jagan Teki <jagan@amarulasolutions.com>
Date: 2017-12-11 16:57:17
Also in:
linux-arm-kernel, lkml
Subsystem:
multifunction devices (mfd), open firmware and flattened device tree bindings, the rest, voltage and current regulator framework · Maintainers:
Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Liam Girdwood, Mark Brown
Like axp221, axp223, axp813 the axp803 is also supporting external regulator to drive the OTG VBus through N_VBUSEN PMIC pin. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> --- Changes for v3: - Update drivevbus in table of regulators Documentation/devicetree/bindings/mfd/axp20x.txt | 3 ++- drivers/regulator/axp20x-regulator.c | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index 9455503..d1762f3 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt@@ -43,7 +43,7 @@ Optional properties: regulator to drive the OTG VBus, rather then as an input pin which signals whether the board is driving OTG VBus or not. - (axp221 / axp223 / axp813 only) + (axp221 / axp223 / axp803/ axp813 only) - x-powers,master-mode: Boolean (axp806 only). Set this when the PMIC is wired for master mode. The default is slave mode.
@@ -132,6 +132,7 @@ FLDO2 : LDO : fldoin-supply : shared supply LDO_IO0 : LDO : ips-supply : GPIO 0 LDO_IO1 : LDO : ips-supply : GPIO 1 RTC_LDO : LDO : ips-supply : always on +DRIVEVBUS : Enable output : drivevbus-supply : external regulator AXP806 regulators, type, and corresponding input supply names:
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 181622b..91b8ff8 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c@@ -721,6 +721,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev) case AXP803_ID: regulators = axp803_regulators; nregulators = AXP803_REG_ID_MAX; + drivevbus = of_property_read_bool(pdev->dev.parent->of_node, + "x-powers,drive-vbus-en"); break; case AXP806_ID: regulators = axp806_regulators;
--
2.7.4