On Sat, Dec 02, 2017 at 05:00:03PM +0100, Linus Walleij wrote:

On Fri, Dec 1, 2017 at 2:44 PM, Quentin Schulz
[off-list ref] wrote:

quoted

The AXP209 and AXP813 PMICs have several pins (respectively 3 and 2) that can
be used either as GPIOs or for other purposes (ADC or LDO here).

We already have a GPIO driver for the GPIO use of those pins on the AXP209.
Let's "upgrade" this driver to support all the functions these pins can have.

Then we add support to this driver for the AXP813 which is slighlty different
(basically a different offset in two registers and one less pin).

I suggest patches 1 to 8 go through Linus's tree and 9 and 10 via Maxime or
Chen-Yu's tree.

v4:

Looks overall good. As soon as Maxime is happy with everything I will
happily apply 1-8 to the pinctrl tree and then pull it to GPIO as well to
avoid clashes.

I think there were some minor comments but it seems almost finished.

You can apply everything with my
Acked-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>

The only comment left is the checkpatch warning, but there's multiple
occurences of that issue in the driver, so it can definitely be done
in a separate patch.

(But please do it Quentin ;))

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com