On 11/18/2017 1:52 AM, Rob Herring wrote:

On Fri, Nov 17, 2017 at 03:18:47PM +0530, Tirupathi Reddy wrote:

quoted

Clkdiv module provides a clock output on the PMIC with CXO as
the source. This clock can be routed through PMIC GPIOs. Add
a device driver to configure this clkdiv module.

Signed-off-by: Tirupathi Reddy <redacted>
Signed-off-by: Stephen Boyd <redacted>

Normally your S-o-B would be last.

Addressed in next patch version [7]

quoted

---
  .../bindings/clock/clk-spmi-pmic-div.txt           |  59 ++++

Please split bindings to a separate patch.

Addressed in next patch version [7]

Otherwise,

Acked-by: Rob Herring <robh@kernel.org>

quoted

  drivers/clk/qcom/Kconfig                           |   9 +
  drivers/clk/qcom/Makefile                          |   1 +
  drivers/clk/qcom/clk-spmi-pmic-div.c               | 308 +++++++++++++++++++++
  4 files changed, 377 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/clock/clk-spmi-pmic-div.txt
  create mode 100644 drivers/clk/qcom/clk-spmi-pmic-div.c