On Thu, Nov 09, 2017 at 10:45:34AM -0800, Tim Harvey wrote:

Add support for the TDA1997x HDMI receivers.

Cc: Hans Verkuil <redacted>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
v3:
 - use V4L2_DV_BT_FRAME_WIDTH/HEIGHT macros
 - fixed missing break
 - use only hdmi_infoframe_log for infoframe logging
 - simplify tda1997x_s_stream error handling
 - add delayed work proc to handle hotplug enable/disable
 - fix set_edid (disable HPD before writing, enable after)
 - remove enabling edid by default
 - initialize timings
 - take quant range into account in colorspace conversion
 - remove vendor/product tracking (we provide this in log_status via infoframes)
 - add v4l_controls
 - add more detail to log_status
 - calculate vhref generator timings
 - timing detection fixes (rounding errors, hswidth errors)
 - rename configure_input/configure_conv functions

v2:
 - implement dv timings enum/cap
 - remove deprecated g_mbus_config op
 - fix dv_query_timings
 - add EDID get/set handling
 - remove max-pixel-rate support
 - add audio codec DAI support
 - change audio bindings
---
 drivers/media/i2c/Kconfig            |    9 +
 drivers/media/i2c/Makefile           |    1 +
 drivers/media/i2c/tda1997x.c         | 3485 ++++++++++++++++++++++++++++++++++
 include/dt-bindings/media/tda1997x.h |   78 +

This belongs with the binding documentation patch.

 include/media/i2c/tda1997x.h         |   53 +
 5 files changed, 3626 insertions(+)
 create mode 100644 drivers/media/i2c/tda1997x.c
 create mode 100644 include/dt-bindings/media/tda1997x.h
 create mode 100644 include/media/i2c/tda1997x.h