Re: [RFC usb-next v5 1/3] dt-bindings: usb: add the documentation for USB root-hub

On Thu, 12 Oct 2017, Martin Blumenstingl wrote:

I haven't tested the described use-case. however, this patch is not
supposed to change the binding for actual devices.
USB device numbering starts at 1, while 0 is reserved for the root-hub
(at least from what I know).

Actually 1 is reserved for the root hub.  External devices are numbered 
starting from 2.  (We can't use 0 for the root hub because, as you 
said, USB device numbering starts at 1!)

Alan Stern

before this patch there was no way to
describe the root-hub via .dts. this however is required for some
platforms that need to set up a PHY for each port on the root-hub
(Amlogic Meson GXL platform is one example: there are two ports
enabled on dwc3's root-hub with 2x USB2 and 1x USB3 PHYs) - so this
patch uses a similar binding as we already have (to describe the
devices) to describe the root-hub


Regards,
Martin
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html