Re: [PATCH 4/8] ARM: dts: aspeed-romulus: Add I2C devices
From: Andrew Jeffery <hidden>
Date: 2017-10-04 05:02:29
Also in:
linux-arm-kernel, linux-aspeed, lkml
On Thu, 2017-09-28 at 17:21 +0930, Joel Stanley wrote:
quoted hunk ↗ jump to hunk
Enable the buses that are in use and the devices that are attached. Currently that is just the battery backed RTC. Some of these buses are for hotplugged cards, such as PCIe cards. Others do not yet have upstream drivers, so there are no devices attached. Signed-off-by: Joel Stanley <redacted> --- arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 54 ++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+)diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 1190fec1b5d0..f79c1d21c47f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts@@ -79,3 +79,57 @@pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; }; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + /* PCIe slot 1 (x8) */ + status = "enabled";
This is not okay. Neither are those below. Cheers, Andrew
+};
+
+&i2c7 {
+ /* PCIe slot 2 (x16) */
+ status = "enabled";
+};
+
+&i2c8 {
+ /* PCIe slot 3 (x16) */
+ status = "enabled";
+};
+
+&i2c9 {
+ /* PCIe slot 4 (x16) */
+ status = "enabled";
+};
+
+&i2c10 {
+ /* PCIe slot 5 (x8) */
+ status = "enabled";
+};
+
+&i2c11 {
+ status = "okay";
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+};Attachments
- signature.asc [application/pgp-signature] 801 bytes