Most devices do not support lane reordering and in many cases the
documentation of the data-lanes property is incomplete for such devices.
Document that in case the lane reordering isn't supported, monotonically
incremented values from 0 or 1 shall be used.
Signed-off-by: Sakari Ailus <sakari.ailus-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Acked-by: Rob Herring <redacted>
---
Documentation/devicetree/bindings/media/video-interfaces.txt | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
index 3c5382f..4b09a34 100644
--- a/Documentation/devicetree/bindings/media/video-interfaces.txt
+++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -114,7 +114,10 @@ Optional endpoint properties
determines the logical lane number, while the value of an entry indicates
physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have
"data-lanes = <1 2>;", assuming the clock lane is on hardware lane 0.
- This property is valid for serial busses only (e.g. MIPI CSI-2).
+ If the hardware does not support lane reordering, monotonically
+ incremented values shall be used from 0 or 1 onwards, depending on
+ whether or not there is also a clock lane. This property is valid for
+ serial busses only (e.g. MIPI CSI-2).
- clock-lanes: an array of physical clock lane indexes. Position of an entry
determines the logical lane number, while the value of an entry indicates
physical lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;",
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html