Thread (1 message) 1 message, 1 author, 2017-09-22
DORMANTno replies

[PATCH v2 1/2] dt: bindings: media: Document practices for DT bindings, ports, endpoints

From: Sakari Ailus <hidden>
Date: 2017-09-22 07:42:13
Also in: linux-media
Subsystem: media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, the rest · Maintainers: Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Port and endpoint numbering has been omitted in DT binding documentation
for a large number of devices. Also common properties the device uses have
been missed in binding documentation. Make it explicit that these things
need to be documented.

Signed-off-by: Sakari Ailus <sakari.ailus-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 .../devicetree/bindings/media/video-interfaces.txt        | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
index 852041a..3c5382f 100644
--- a/Documentation/devicetree/bindings/media/video-interfaces.txt
+++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -55,6 +55,21 @@ divided into two separate ITU-R BT.656 8-bit busses.  In such case bus-width
 and data-shift properties can be used to assign physical data lines to each
 endpoint node (logical bus).
 
+Documenting bindings for devices
+--------------------------------
+
+All required and optional bindings the device supports shall be explicitly
+documented in device DT binding documentation. This also includes port and
+endpoint numbering for the device.
+
+Port and endpoint numbering
+---------------------------
+
+Old binding documentation may have omitted explicitly specifying port and
+endpoint numbers. This often applies to devices that have a single port and a
+single endpoint in that port. In this case, the only valid port number for such
+a device is zero. The same applies for devices for which bindings do not
+document endpoint numbering: only zero is a valid endpoint.
 
 Required properties
 -------------------
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help