Re: [PATCH 4/8] ARM: dts: iwg22d: Enable SDHI0 controller
From: Simon Horman <horms@verge.net.au>
Date: 2017-09-15 08:05:30
Also in:
linux-arm-kernel, linux-renesas-soc
Possibly related (same subject, not in this thread)
- 2017-09-22 · RE: [PATCH 4/8] ARM: dts: iwg22d: Enable SDHI0 controller · Chris Paterson <hidden>
- 2017-09-21 · Re: [PATCH 4/8] ARM: dts: iwg22d: Enable SDHI0 controller · Simon Horman <hidden>
- 2017-09-20 · RE: [PATCH 4/8] ARM: dts: iwg22d: Enable SDHI0 controller · Fabrizio Castro <hidden>
On Wed, Sep 13, 2017 at 06:05:37PM +0100, Chris Paterson wrote:
From: Fabrizio Castro <redacted> Enable the SDHI0 controller on iWave RZ/G1E carrier board.
...
quoted hunk ↗ jump to hunk
@@ -63,3 +88,15 @@ micrel,led-mode = <1>; }; }; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
I take that the absence of a wp-gpio means that that this is a µSD slot. Could you help me by documenting this correctly on http://elinux.org/index.php?title=Renesas-MMC-Enabled-Speeds ? For some reason I thought that SDHI0 wasn't exposed at all, so I guess my reading of the documentation was incorrect. I think you also want sd-uhs-sdr50 here too. You can test it by removing the sd-uhs-sdr104 property.
+ sd-uhs-sdr104; + status = "okay"; +}; -- 1.9.1