[PATCH v2 12/13] ARM: dts: sun6i: Add device node for HDMI controller
From: Chen-Yu Tsai <hidden>
Date: 2017-09-26 07:00:56
Also in:
dri-devel, linux-arm-kernel, linux-clk, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Now that we support the HDMI controller on the A31 SoC, we can add it to the device tree. This adds a device node for the HDMI controller, and the of_graph nodes connecting it to the 2 TCONs. Signed-off-by: Chen-Yu Tsai <redacted> --- arch/arm/boot/dts/sun6i-a31.dtsi | 55 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 93209cda28db..48b2382a18a9 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi@@ -289,6 +289,12 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tcon0_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; }; }; };
@@ -331,6 +337,12 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tcon1_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon1>; + allwinner,tcon-channel = <1>; + }; }; }; };
@@ -411,6 +423,49 @@ #size-cells = <0>; }; + hdmi: hdmi@01c16000 { + compatible = "allwinner,sun6i-a31-hdmi"; + reg = <0x01c16000 0x1000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>, + <&ccu CLK_HDMI_DDC>, + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; + clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1"; + resets = <&ccu RST_AHB1_HDMI>; + reset-names = "ahb"; + dma-names = "ddc-tx", "ddc-rx", "audio-tx"; + dmas = <&dma 13>, <&dma 13>, <&dma 14>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hdmi_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_hdmi>; + }; + + hdmi_in_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + usb_otg: usb@01c19000 { compatible = "allwinner,sun6i-a31-musb"; reg = <0x01c19000 0x0400>;
--
2.14.1