[PATCH] clk: sunxi-ng: Implement reset control status readback
From: Chen-Yu Tsai <hidden>
Date: 2017-09-26 02:36:26
Also in:
linux-clk, lkml
Subsystem:
arm/allwinner sunxi soc support, common clk framework, the rest · Maintainers:
Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Michael Turquette, Stephen Boyd, Linus Torvalds
Until now we were not providing a way to read back the status of our
reset controls. Consumers had no real way to be certain whether a
peripheral was held in reset or not.
Implement the status callback to complete the API support.
Fixes: 1d80c14248d6 ("clk: sunxi-ng: Add common infrastructure")
Signed-off-by: Chen-Yu Tsai <redacted>
---
drivers/clk/sunxi-ng/ccu_reset.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/clk/sunxi-ng/ccu_reset.c b/drivers/clk/sunxi-ng/ccu_reset.c
index 1dc4e98ea802..b67149143554 100644
--- a/drivers/clk/sunxi-ng/ccu_reset.c
+++ b/drivers/clk/sunxi-ng/ccu_reset.c@@ -60,8 +60,22 @@ static int ccu_reset_reset(struct reset_controller_dev *rcdev, return 0; } +static int ccu_reset_status(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct ccu_reset *ccu = rcdev_to_ccu_reset(rcdev); + const struct ccu_reset_map *map = &ccu->reset_map[id]; + + /* + * The reset control API expects 0 if reset is not asserted, + * which is the opposite of what our hardware uses. + */ + return !(map->bit & readl(ccu->base + map->reg)); +} + const struct reset_control_ops ccu_reset_ops = { .assert = ccu_reset_assert, .deassert = ccu_reset_deassert, .reset = ccu_reset_reset, + .status = ccu_reset_status, };
--
2.14.1