Dear Mauro

Thanks for your review and reply.

We are going to discuss how to change our code with your comments internally.

I reply for your  2 comments,

quoted

[Change list]
Changes in V3
   drivers/media/dvb-frontends/cxd2880/cxd2880_dtv.h
      -removed code relevant to ISDB-T

Just curiosity here: why is it removed?

We decided to withhold the ISDB-T functionality as it contains some company proprietary code.

quoted

+	if (ret)
+		return ret;
+	if ((sys == CXD2880_DTV_SYS_DVBT2) && en_fef_intmtnt_ctrl) {
+		data[0] = 0x01;
+		data[1] = 0x01;
+		data[2] = 0x01;
+		data[3] = 0x01;
+		data[4] = 0x01;
+		data[5] = 0x01;
+	} else {
+		data[0] = 0x00;
+		data[1] = 0x00;
+		data[2] = 0x00;
+		data[3] = 0x00;
+		data[4] = 0x00;
+		data[5] = 0x00;
+	}

Instead, just do:

	if ((sys == CXD2880_DTV_SYS_DVBT2) && en_fef_intmtnt_ctrl)
		memset(data, 0x01, sizeof(data));
	else
		memset(data, 0x00, sizeof(data));

quoted

+	ret = tnr_dmd->io->write_regs(tnr_dmd->io,
+				      CXD2880_IO_TGT_SYS,
+				      0xef, data, 6);
+	if (ret)
+		return ret;
+
+	ret = tnr_dmd->io->write_reg(tnr_dmd->io,
+				     CXD2880_IO_TGT_DMD,
+				     0x00, 0x2d);
+	if (ret)
+		return ret;

quoted

+	if ((sys == CXD2880_DTV_SYS_DVBT2) && en_fef_intmtnt_ctrl)
+		data[0] = 0x00;
+	else
+		data[0] = 0x01;

Not actually needed, as the previous logic already set data[0]
accordingly.

quoted

+	ret = tnr_dmd->io->write_reg(tnr_dmd->io,
+				     CXD2880_IO_TGT_DMD,
+				     0xb1, data[0]);

In this case、logic of data[0]( logic of if() ) is different from that of previous one.
And with setting register for address 0xb1, a bug might occur in the future, 
if our software specification (sequence) is changed.
So we would like to keep setting value of data[0] for address 0xb1.

Thanks,
Takiguchi