[PATCH v2 1/3] dt-bindings: watchdog: Add Realtek RTD1295
flat view
STALE3318d
SUPERSEDED: 6 (6M)
From: Andreas Färber <afaerber@suse.de>
Date: 2017-09-04 23:16:15
Also in:
linux-arm-kernel, linux-watchdog, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, watchdog device drivers · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Wim Van Sebroeck, Guenter Roeck
Revision v2 of 3 in this series; 1 review trailer (1 from subsystem maintainers).
Revisions (3)
- v1 [diff vs current]
- v2 current
- v3 [diff vs current]
Add a binding for the Realtek RTD1295 watchdog. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andreas Färber <afaerber@suse.de> --- v1 -> v2: Unchanged .../devicetree/bindings/watchdog/realtek,rtd119x.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt
diff --git a/Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt b/Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt
new file mode 100644
index 000000000000..05653054bd5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt@@ -0,0 +1,17 @@ +Realtek RTD1295 Watchdog +======================== + +Required properties: + +- compatible : Should be "realtek,rtd1295-watchdog" +- reg : Specifies the physical base address and size of registers +- clocks : Specifies one clock input + + +Example: + + watchdog@98007680 { + compatible = "realtek,rtd1295-watchdog"; + reg = <0x98007680 0x100>; + clocks = <&osc27M>; + };
--
2.13.5