The H3 supports bursts lengths of 1, 4, 8 and 16 transfers, each with
a width of 1, 2, 4 or 8 bytes.

The register value for the the width is log2-encoded, change the
conversion function to provide the correct value for width == 8.

Signed-off-by: Stefan Brüns <redacted>
---
 drivers/dma/sun6i-dma.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index c5644bd0f91a..335a8ec88b0b 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c

@@ -263,8 +263,12 @@ static inline s8 convert_burst(u32 maxburst)
 	switch (maxburst) {
 	case 1:
 		return 0;
+	case 4:
+		return 1;
 	case 8:
 		return 2;
+	case 16:
+		return 3;
 	default:
 		return -EINVAL;
 	}

@@ -272,7 +276,7 @@ static inline s8 convert_burst(u32 maxburst)
 
 static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width)
 {
-	return addr_width >> 1;
+	return ilog2(addr_width);
 }
 
 static size_t sun6i_get_chan_size(struct sun6i_pchan *pchan)

@@ -1152,6 +1156,12 @@ static int sun6i_dma_probe(struct platform_device *pdev)
 						  BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
 	sdc->src_burst_lengths			= BIT(1) | BIT(8);
 	sdc->dst_burst_lengths			= BIT(1) | BIT(8);
+	if (sdc->cfg->dmac_variant == DMAC_VARIANT_H3) {
+		sdc->slave.src_addr_widths |= BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
+		sdc->slave.dst_addr_widths |= BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
+		sdc->src_burst_lengths     |= BIT(4) | BIT(16);
+		sdc->dst_burst_lengths     |= BIT(4) | BIT(16);
+	}