[PATCH 08/17] ARM: dts: Add missing hsi node for omap4

@@ -4,7 +4,7 @@ OMAP Synchronous Serial Interface (SSI) controller implements a legacy
 variant of MIPI's High Speed Synchronous Serial Interface (HSI).
 
 Required properties:
-- compatible:		Should include "ti,omap3-ssi".
+- compatible:		Should include "ti,omap3-ssi" or "ti,omap4-hsi"
 - reg-names:		Contains the values "sys" and "gdd" (in this order).
 - reg:			Contains a matching register specifier for each entry
 			in reg-names.

@@ -27,6 +27,7 @@ Each port is represented as a sub-node of the ti,omap3-ssi device.
 Required Port sub-node properties:
 - compatible:		Should be set to the following value
 			ti,omap3-ssi-port (applicable to OMAP34xx devices)
+			ti,omap4-ssi-port (applicable to OMAP44xx devices)
 - reg-names:		Contains the values "tx" and "rx" (in this order).
 - reg:			Contains a matching register specifier for each entry
 			in reg-names.

@@ -38,6 +39,10 @@ Required Port sub-node properties:
 			property. If it's missing the port will not be
 			enabled.
 
+Optional properties:
+- ti,hwmods:		Shall contain TI interconnect module name if needed
+			by the SoC
+
 Example for Nokia N900:
 
 ssi-controller@48058000 {

@@ -632,6 +632,40 @@
 			dma-names = "tx", "rx";
 		};
 
+		hsi: hsi@4a058000 {
+			compatible = "ti,omap4-hsi";
+			reg = <0x4a058000 0x4000>,
+			      <0x4a05c000 0x1000>;
+			reg-names = "sys", "gdd";
+			ti,hwmods = "hsi";
+
+			clocks = <&hsi_fck>;
+			clock-names = "hsi_fck";
+
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gdd_mpu";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4a058000 0x4000>;
+
+			hsi_port1: hsi-port@2000 {
+				compatible = "ti,omap4-hsi-port";
+				reg = <0x2000 0x800>,
+				      <0x2800 0x800>;
+				reg-names = "tx", "rx";
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			hsi_port2: hsi-port@3000 {
+				compatible = "ti,omap4-hsi-port";
+				reg = <0x3000 0x800>,
+				      <0x3800 0x800>;
+				reg-names = "tx", "rx";
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		mmu_dsp: mmu@4a066000 {
 			compatible = "ti,omap4-iommu";
 			reg = <0x4a066000 0x100>;