Re: [PATCH v2 2/3] dt-binding: net: sfp binding documentation
From: Sergei Shtylyov <hidden>
Date: 2017-08-30 11:15:32
Also in:
netdev
On 8/30/2017 2:11 PM, Baruch Siach wrote:
On Wed, Aug 30, 2017 at 02:04:11PM +0300, Sergei Shtylyov wrote:quoted
On 8/30/2017 12:51 PM, Baruch Siach wrote:quoted
Add device-tree binding documentation SFP transceivers. Support for SFP transceivers has been recently introduced (drivers/net/phy/sfp.c). Signed-off-by: Baruch Siach <redacted> --- v2: Rename -gpio properties to -gpios Rename the rate-select-gpio property to rate-select0-gpios Add the rate-select1-gpios property Add examples --- Documentation/devicetree/bindings/net/sff,sfp.txt | 74 +++++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/sff,sfp.txtdiff --git a/Documentation/devicetree/bindings/net/sff,sfp.txt b/Documentation/devicetree/bindings/net/sff,sfp.txt new file mode 100644 index 000000000000..1d9c786d6287 --- /dev/null +++ b/Documentation/devicetree/bindings/net/sff,sfp.txt@@ -0,0 +1,74 @@ +Small Form Factor (SFF) Committee Small Form-factor Pluggable (SFP) +Transceiver + +Required properties: + +- compatible : must be "sff,sfp" + +Optional Properties: + +- i2c-bus : phandle of an I2C bus controller for the SFP two wire serial + interface + +- moddef0-gpios : phandle of the MOD-DEF0 (AKA Mod_ABS) module presence input + gpio signalYour example shows there's GPIO phandle *and* specifier.Would "GPIO specifier" be enough here?
No, specifier is the cells following GPIO (or any other) phandle.
[...]
MBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html