Re: [PATCH 3/3] irqchip: bcm2836: Move SMP startup code to arch/arm

In order to easily provide SMP for BCM2837 on 32-bit and 64-bit
the SMP startup code was placed in irq-bcm2836. That's not the
right approach. So move this code where it belongs.

Signed-off-by: Stefan Wahren <redacted>
Fixes: 41f4988cc287 ("irqchip/bcm2836: Add SMP support for the 2836")
---
 arch/arm/mach-bcm/Makefile          |  3 ++
 arch/arm/mach-bcm/platsmp.c         | 35 ++++++++++++++++
 drivers/irqchip/irq-bcm2836.c       | 79 +------------------------------------
 include/linux/irqchip/irq-bcm2836.h | 70 ++++++++++++++++++++++++++++++++
 4 files changed, 110 insertions(+), 77 deletions(-)
 create mode 100644 include/linux/irqchip/irq-bcm2836.h

diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 980f585..637cd9e 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile

@@ -43,6 +43,9 @@ endif
 
 # BCM2835
 obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2835.o
+ifeq ($(CONFIG_ARCH_BCM2835),y)
+obj-$(CONFIG_SMP)		+= platsmp.o
+endif
 
 # BCM5301X
 obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o

diff --git a/arch/arm/mach-bcm/platsmp.c b/arch/arm/mach-bcm/platsmp.c
index 9e3f275..3fa1a99 100644
--- a/arch/arm/mach-bcm/platsmp.c
+++ b/arch/arm/mach-bcm/platsmp.c

@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/irqchip/irq-bcm2836.h>
 #include <linux/jiffies.h>
 #include <linux/of.h>
 #include <linux/of_address.h>

@@ -287,6 +288,35 @@ static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return ret;
 }
 
+static int bcm2836_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	void __iomem *intc_base;
+	struct device_node *dn;
+	char *name;
+
+	name = "brcm,bcm2836-l1-intc";
+	dn = of_find_compatible_node(NULL, NULL, name);
+	if (!dn) {
+		pr_err("unable to find intc node\n");
+		return -ENODEV;
+	}
+
+	intc_base = of_iomap(dn, 0);
+	of_node_put(dn);
+
+	if (!intc_base) {
+		pr_err("unable to remap intc base register\n");
+		return -ENOMEM;
+	}
+
+	writel(virt_to_phys(secondary_startup),
+	       intc_base + LOCAL_MAILBOX3_SET0 + 16 * cpu);

+
+	iounmap(intc_base);
+
+	return 0;
+}
+
 static const struct smp_operations kona_smp_ops __initconst = {
 	.smp_prepare_cpus	= bcm_smp_prepare_cpus,
 	.smp_boot_secondary	= kona_boot_secondary,

@@ -305,3 +335,8 @@ static const struct smp_operations nsp_smp_ops __initconst = {
 	.smp_boot_secondary	= nsp_boot_secondary,
 };
 CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops);
+
+static const struct smp_operations bcm2836_smp_ops __initconst = {
+	.smp_boot_secondary	= bcm2836_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(bcm_smp_bcm2836, "brcm,bcm2836-smp", &bcm2836_smp_ops);

diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c
index e7463e3..cb4a6f5 100644
--- a/drivers/irqchip/irq-bcm2836.c
+++ b/drivers/irqchip/irq-bcm2836.c

@@ -19,62 +19,9 @@
 #include <linux/of_irq.h>
 #include <linux/irqchip.h>
 #include <linux/irqdomain.h>
-#include <asm/exception.h>
-
-#define LOCAL_CONTROL			0x000
-#define LOCAL_PRESCALER			0x008
+#include <linux/irqchip/irq-bcm2836.h>
 
-/*
- * The low 2 bits identify the CPU that the GPU IRQ goes to, and the
- * next 2 bits identify the CPU that the GPU FIQ goes to.
- */
-#define LOCAL_GPU_ROUTING		0x00c
-/* When setting bits 0-3, enables PMU interrupts on that CPU. */
-#define LOCAL_PM_ROUTING_SET		0x010
-/* When setting bits 0-3, disables PMU interrupts on that CPU. */
-#define LOCAL_PM_ROUTING_CLR		0x014
-/*
- * The low 4 bits of this are the CPU's timer IRQ enables, and the
- * next 4 bits are the CPU's timer FIQ enables (which override the IRQ
- * bits).
- */
-#define LOCAL_TIMER_INT_CONTROL0	0x040
-/*
- * The low 4 bits of this are the CPU's per-mailbox IRQ enables, and
- * the next 4 bits are the CPU's per-mailbox FIQ enables (which
- * override the IRQ bits).
- */
-#define LOCAL_MAILBOX_INT_CONTROL0	0x050
-/*
- * The CPU's interrupt status register.  Bits are defined by the the
- * LOCAL_IRQ_* bits below.
- */
-#define LOCAL_IRQ_PENDING0		0x060
-/* Same status bits as above, but for FIQ. */
-#define LOCAL_FIQ_PENDING0		0x070
-/*
- * Mailbox write-to-set bits.  There are 16 mailboxes, 4 per CPU, and
- * these bits are organized by mailbox number and then CPU number.  We
- * use mailbox 0 for IPIs.  The mailbox's interrupt is raised while
- * any bit is set.
- */
-#define LOCAL_MAILBOX0_SET0		0x080
-#define LOCAL_MAILBOX3_SET0		0x08c
-/* Mailbox write-to-clear bits. */
-#define LOCAL_MAILBOX0_CLR0		0x0c0
-#define LOCAL_MAILBOX3_CLR0		0x0cc
-
-#define LOCAL_IRQ_CNTPSIRQ	0
-#define LOCAL_IRQ_CNTPNSIRQ	1
-#define LOCAL_IRQ_CNTHPIRQ	2
-#define LOCAL_IRQ_CNTVIRQ	3
-#define LOCAL_IRQ_MAILBOX0	4
-#define LOCAL_IRQ_MAILBOX1	5
-#define LOCAL_IRQ_MAILBOX2	6
-#define LOCAL_IRQ_MAILBOX3	7
-#define LOCAL_IRQ_GPU_FAST	8
-#define LOCAL_IRQ_PMU_FAST	9
-#define LAST_IRQ		LOCAL_IRQ_PMU_FAST
+#include <asm/exception.h>
 
 struct bcm2836_arm_irqchip_intc {
 	struct irq_domain *domain;

@@ -215,24 +162,6 @@ static int bcm2836_cpu_dying(unsigned int cpu)
 					     cpu);
 	return 0;
 }
-
-#ifdef CONFIG_ARM
-static int __init bcm2836_smp_boot_secondary(unsigned int cpu,
-					     struct task_struct *idle)
-{
-	unsigned long secondary_startup_phys =
-		(unsigned long)virt_to_phys((void *)secondary_startup);
-
-	writel(secondary_startup_phys,
-	       intc.base + LOCAL_MAILBOX3_SET0 + 16 * cpu);
-
-	return 0;
-}
-
-static const struct smp_operations bcm2836_smp_ops __initconst = {
-	.smp_boot_secondary	= bcm2836_smp_boot_secondary,
-};
-#endif
 #endif
 
 static const struct irq_domain_ops bcm2836_arm_irqchip_intc_ops = {

@@ -249,10 +178,6 @@ bcm2836_arm_irqchip_smp_init(void)
 			  bcm2836_cpu_dying);
 
 	set_smp_cross_call(bcm2836_arm_irqchip_send_ipi);
-
-#ifdef CONFIG_ARM
-	smp_set_ops(&bcm2836_smp_ops);
-#endif
 #endif
 }
 

diff --git a/include/linux/irqchip/irq-bcm2836.h b/include/linux/irqchip/irq-bcm2836.h
new file mode 100644
index 0000000..218a6e1
--- /dev/null
+++ b/include/linux/irqchip/irq-bcm2836.h

@@ -0,0 +1,70 @@
+/*
+ * Root interrupt controller for the BCM2836 (Raspberry Pi 2).
+ *
+ * Copyright 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define LOCAL_CONTROL			0x000
+#define LOCAL_PRESCALER			0x008
+
+/*
+ * The low 2 bits identify the CPU that the GPU IRQ goes to, and the
+ * next 2 bits identify the CPU that the GPU FIQ goes to.
+ */
+#define LOCAL_GPU_ROUTING		0x00c
+/* When setting bits 0-3, enables PMU interrupts on that CPU. */
+#define LOCAL_PM_ROUTING_SET		0x010
+/* When setting bits 0-3, disables PMU interrupts on that CPU. */
+#define LOCAL_PM_ROUTING_CLR		0x014
+/*
+ * The low 4 bits of this are the CPU's timer IRQ enables, and the
+ * next 4 bits are the CPU's timer FIQ enables (which override the IRQ
+ * bits).
+ */
+#define LOCAL_TIMER_INT_CONTROL0	0x040
+/*
+ * The low 4 bits of this are the CPU's per-mailbox IRQ enables, and
+ * the next 4 bits are the CPU's per-mailbox FIQ enables (which
+ * override the IRQ bits).
+ */
+#define LOCAL_MAILBOX_INT_CONTROL0	0x050
+/*
+ * The CPU's interrupt status register.  Bits are defined by the the
+ * LOCAL_IRQ_* bits below.
+ */
+#define LOCAL_IRQ_PENDING0		0x060
+/* Same status bits as above, but for FIQ. */
+#define LOCAL_FIQ_PENDING0		0x070
+/*
+ * Mailbox write-to-set bits.  There are 16 mailboxes, 4 per CPU, and
+ * these bits are organized by mailbox number and then CPU number.  We
+ * use mailbox 0 for IPIs.  The mailbox's interrupt is raised while
+ * any bit is set.
+ */
+#define LOCAL_MAILBOX0_SET0		0x080
+#define LOCAL_MAILBOX3_SET0		0x08c
+/* Mailbox write-to-clear bits. */
+#define LOCAL_MAILBOX0_CLR0		0x0c0
+#define LOCAL_MAILBOX3_CLR0		0x0cc
+
+#define LOCAL_IRQ_CNTPSIRQ	0
+#define LOCAL_IRQ_CNTPNSIRQ	1
+#define LOCAL_IRQ_CNTHPIRQ	2
+#define LOCAL_IRQ_CNTVIRQ	3
+#define LOCAL_IRQ_MAILBOX0	4
+#define LOCAL_IRQ_MAILBOX1	5
+#define LOCAL_IRQ_MAILBOX2	6
+#define LOCAL_IRQ_MAILBOX3	7
+#define LOCAL_IRQ_GPU_FAST	8
+#define LOCAL_IRQ_PMU_FAST	9
+#define LAST_IRQ		LOCAL_IRQ_PMU_FAST