[PATCH v3 9/9] ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 mode
From: Jerome Brunet <jbrunet@baylibre.com>
Date: 2017-08-31 13:52:46
Also in:
linux-amlogic, linux-arm-kernel, lkml
Subsystem:
arm/amlogic meson soc support, the rest · Maintainers:
Neil Armstrong, Kevin Hilman, Linus Torvalds
SDR104 seems to be OK on the nanopi-k2 SBC so enable it Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index 4c1320a93fef..4b17a76959b2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts@@ -288,7 +288,8 @@ sd-uhs-sdr12; sd-uhs-sdr25; sd-uhs-sdr50; - max-frequency = <100000000>; + sd-uhs-sdr104; + max-frequency = <200000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
--
2.9.5