[PATCH v2 1/2] dt-bindings: leds: gpio: Add optional retain-state-shutdown property
From: Andrew Jeffery <hidden>
Date: 2017-08-28 00:18:11
Also in:
linux-leds, lkml, openbmc
Subsystem:
led subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
On Baseboard Management Controller (BMC) systems it's sometimes necessary for a LED to retain its state across a BMC reset (which is independent of the host system state). Add a devicetree property to describe this behaviour. The property would typically be used in conjunction with 'default-state = "keep"'. Signed-off-by: Andrew Jeffery <redacted> --- Documentation/devicetree/bindings/leds/leds-gpio.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
index 76535ca37120..a48dda268f81 100644
--- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt@@ -18,6 +18,9 @@ LED sub-node properties: see Documentation/devicetree/bindings/leds/common.txt - retain-state-suspended: (optional) The suspend state can be retained.Such as charge-led gpio. +- retain-state-shutdown: (optional) Retain the state of the LED on shutdown. + Useful in BMC systems, for example when the BMC is rebooted while the host + remains up. - panic-indicator : (optional) see Documentation/devicetree/bindings/leds/common.txt
--
2.11.0