On Tue, 2017-08-22 at 14:44 -0700, Vineet Gupta wrote:

On 07/12/2017 02:40 AM, Eugeniy Paltsev wrote:

quoted

Most of the time we indeed use the one and only LINUX_LINK_BASE
set to 0x8000_0000. But there might be good reasons to move
the kernel to another location like 0x9z etc.
And we want IOC aperture to cover entire area used by the kernel,
so let's make its base matching link base

How about something below....

Currently IOC aperture base is hardcoded to 0x8000_0000 which may not
be true for 
non default values of CONFIG_LINUX_LINK_BASE, so use the config value

quoted

and add required asserts:
checking IOC aperture base address and size to be supported by IOC.

.... And while at it, also add the required asserts expected by the
IOC 
programming model.

quoted

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
---
  arch/arc/mm/cache.c | 33 ++++++++++++++++++++++++---------
  1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index a867575..383ff77 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c

@@ -1083,7 +1083,8 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start,

uint32_t, sz, uint32_t, flags)
   */
  noinline void __init arc_ioc_setup(void)
  {
-	unsigned int ap_sz;
+	unsigned int ap_base;
+	long ap_size;

Is there a reason they are different types ?
Also the way you use it below, best to call it mem_size !

Ok, I used long for ap_size as it simply populated by arc_get_mem_sz
------------->8----------
ap_size = arc_get_mem_sz();
------------->8----------
and arc_get_mem_sz return long.


Probably I should fix arc_get_mem_sz because it simply return
low_mem_sz which is unsigned long!

------------->8----------
static unsigned long low_mem_sz;
long __init arc_get_mem_sz(void)
{
	return low_mem_sz;
}
------------->8----------

quoted

  
  	/* Flush + invalidate + disable L1 dcache */
  	__dc_disable();

@@ -1092,18 +1093,32 @@ noinline void __init arc_ioc_setup(void)

  	if (read_aux_reg(ARC_REG_SLC_BCR))
  		slc_entire_op(OP_FLUSH_N_INV);
  
-	/* IOC Aperture start: TDB: handle non default
CONFIG_LINUX_LINK_BASE */
-	write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000);
-
  	/*
-	 * IOC Aperture size:
-	 *   decoded as 2 ^ (SIZE + 2) KB: so setting 0x11 implies
512M
-	 * TBD: fix for PGU + 1GB of low mem
+	 * IOC Aperture size is equal to memory size.
+	 * TBD: fix for PGU + 1GiB of low mem

Not really averse to this per-se, but conventionally we've not used
KiB or GiB 
etc, so I'd prefer KB, GB... just for consistency and ability to grep
correctly.

But we also use KiB, MiB, GiB for ARC:
$ grep -r -I -e "MiB" -e "GiB" arch/arc/
reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MiB low mem */
0x1 0xc0000000 0x0 0x40000000>;	/* 1 GiB highmem */
reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MiB low mem */
0x1 0xc0000000 0x0 0x40000000>;	/* 1 GiB highmem */
reg = <0x0 0x80000000 0x0 0x1b000000>;	/* (512 - 32) MiB */
reg = <0x80000000 0x20000000>;	/* 512MiB */
reg = <0x80000000 0x20000000>;	/* 512MiB */
..........

quoted

  	 * TBD: fix for PAE
  	 */
-	ap_sz = order_base_2(arc_get_mem_sz()/1024) - 2;
-	write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, ap_sz);
+	ap_size = arc_get_mem_sz();
+
+	if (!is_power_of_2(ap_size) || ap_size < 4096)
+		panic("IOC Aperture size must be power of 2 larger
than 4KiB");
+
+	/*
+	 * IOC Aperture size decoded as 2 ^ (SIZE + 2) KiB,
+	 * so setting 0x11 implies 512MiB, 0x12 implies 1G...
+	 */
+	write_aux_reg(ARC_REG_IO_COH_AP0_SIZE,
order_base_2(ap_size / 1024) - 2);

for (ap_size / 1024) can you use (ap_size >> 10)

I absolutely sure what compiler will implement this division 
ap_size/1024 as right shift by itself.

So lets don't make things look more complicated than they are :)

quoted

+
+	/*
+	 * For now we assume IOC aperture to cover all the memory
used by the
+	 * kernel.
+	 */
+	ap_base = CONFIG_LINUX_LINK_BASE;
+
+	if (ap_base % ap_size != 0)
+		panic("IOC Aperture start must be aligned to the
size of the aperture");

This is good.

quoted

  
+	write_aux_reg(ARC_REG_IO_COH_AP0_BASE, ap_base >> 12);
  	write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1);
  	write_aux_reg(ARC_REG_IO_COH_ENABLE, 1);
  

-- 
 Eugeniy Paltsev��칻
�&�~�&���+-��ݶ��w��˛���m�^�'
����{ay�
ʇڙ�,j��f���h�����/oSc��ڳ9�u�����&jw��(�階�ݢj"���m�����z�ޖ���f���h���~�m�