Hi,

On 23.8.2017 16:28, Javier Martinez Canillas wrote:

Hello Michal,

On Wed, Jun 21, 2017 at 1:43 PM, Michal Simek [off-list ref] wrote:

quoted

On 15.6.2017 20:54, Javier Martinez Canillas wrote:

quoted

The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.

But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.

So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.

Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>

[snip]

quoted

quoted

--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts

@@ -92,7 +92,7 @@
                      #size-cells = <0>;
                      reg = <2>;
                      eeprom@54 {
-                             compatible = "at,24c08";
+                             compatible = "atmel,24c08";
                              reg = <0x54>;
                      };
              };

Acked-by: Michal Simek <redacted>

Same question than for the other patch, could you please also apply this?

Sorry for not being clear in the cover letter that the patches could
be applied independently.

Ok. Applied to
https://github.com/Xilinx/linux-xlnx/commits/zynq/dt

Will wait if something else pop up.

Arnd: If you want to take this directly, feel free to do it.

Thanks,
Michal