Re: [PATCH v2 2/2] dt-bindings: ata: add DT bindings for MediaTek SATA controller
From: Ryder Lee <ryder.lee@mediatek.com>
Date: 2017-08-11 03:57:58
Also in:
linux-ide, linux-mediatek, lkml
From: Ryder Lee <ryder.lee@mediatek.com>
Date: 2017-08-11 03:57:58
Also in:
linux-ide, linux-mediatek, lkml
Hi Rob, Sorry for the noise letter. On Fri, 2017-08-11 at 10:25 +0800, Ryder Lee wrote:
quoted
quoted
+Required properties: + - compatible : Must be "mediatek,ahci".SoC specific compatible strings please.Okay.
I took a look at ./ahci-platform.txt. Could we just add a generic compatible string as below: compatible: Must be "mediatek,soc-model-ahci", "mediatek,mtk-ahci" In doing so, we can avoid having an endless list of compatibles for those MTK SoCs with the same IP block.
quoted
quoted
+ +Optional properties: + - power-domains : A phandle and power domain specifier pair to the power + domain which is responsible for collapsing and restoring + power to the peripheral. + - resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names : Associated names must be: "axi", "sw", "reg". + - mediatek,phy-mode : A phandle to the system controller, used to enable + SATA function. + +Example: + + sata: sata@1a200000 { + compatible = "mediatek,ahci";
MT7622 should be:
compatible = "mediatek,mt7622-ahci",
"mediatek,mtk-ahci";
Ryder