[PATCH v2 3/5] arm64: dts: rockchip: add tsadc node for rk3328 SoC
From: Rocky Hao <hidden>
Date: 2017-08-04 08:03:41
Also in:
linux-arm-kernel, linux-pm, linux-rockchip, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
add tsadc needed main information for rk3328 SoC. 50000Hz is the max clock rate supported by tsadc module. Signed-off-by: Rocky Hao <redacted> --- Change in v2: - remove gerrit Change-Id arch/arm64/boot/dts/rockchip/rk3328.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index db4b2708084d..186fb93fdffd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi@@ -308,6 +308,26 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; }; + tsadc: tsadc@ff250000 { + compatible = "rockchip,rk3328-tsadc"; + reg = <0x0 0xff250000 0x0 0x100>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>; + rockchip,grf = <&grf>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + assigned-clocks = <&cru SCLK_TSADC>; + assigned-clock-rates = <50000>; + resets = <&cru SRST_TSADC>; + reset-names = "tsadc-apb"; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; + #thermal-sensor-cells = <1>; + rockchip,hw-tshut-temp = <100000>; + status = "disabled"; + }; + saradc: adc@ff280000 { compatible = "rockchip,rk3328-saradc", "rockchip,rk3399-saradc"; reg = <0x0 0xff280000 0x0 0x100>;
--
1.9.1