On 08/03/2017 08:08 PM, David Lechner wrote:

On 08/03/2017 03:11 PM, Noralf Trønnes wrote:

quoted

Den 03.08.2017 19.11, skrev Andy Shevchenko:

quoted

On Thu, Aug 3, 2017 at 8:09 PM, Andy Shevchenko
[off-list ref] wrote:

quoted

On Thu, Aug 3, 2017 at 6:18 PM, David Lechner [off-list ref] 
wrote:

quoted

The particular display I have is this one:
http://wiki.seeed.cc/Grove-OLED_Display_1.12inch/

It looks like it uses a command/data scheme like the MIPI displays, 
but
doesn't use any of the standard values for the commands. The 
controller can
do parallel, SPI and I2C, but the display I have is wired for I2C.

It looks very similar to ssd1306. Some description refers to ssd1308.

http://www.mouser.com/catalog/specsheets/Seeed_104030008.pdf

That pdf refers to another one: 
http://wiki.seeed.cc/Grove-OLED_Display_0.96inch/
There's an fbdev driver that supports ssd1305, ssd1306, ssd1307 and 
ssd1309:
https://www.kernel.org/doc/Documentation/devicetree/bindings/display/ssd1307fb.txt 

http://elixir.free-electrons.com/linux/latest/source/drivers/video/fbdev/ssd1307fb.c 

Maybe the ssd1308 will work with that driver...

The display I have uses a ssd1327 controller. It is 16-bit grayscale. 
The ssd130x are all 1-bit monochrome. So, probably more like the ssd1325 
driver in fbftf.

correction, 4-bit grayscale
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html