Thread (16 messages) 16 messages, 4 authors, 2017-08-11
STALE3274d
Revisions (3)
  1. v2 current
  2. v3 [diff vs current]
  3. v4 [diff vs current]

[PATCH v2 4/5] soc: qcom: Remote FS memory driver

From: Bjorn Andersson <hidden>
Date: 2017-08-03 02:58:39
Also in: linux-arm-msm, lkml
Subsystem: arm/qualcomm mailing list, arm/qualcomm support, open firmware and flattened device tree, the rest · Maintainers: Bjorn Andersson, Konrad Dybcio, Rob Herring, Saravana Kannan, Linus Torvalds

The rfsa driver is used for allocating and exposing regions of shared
memory with remote processors for the purpose of exchanging sector-data
between the remote filesystem service and its clients.

Signed-off-by: Bjorn Andersson <redacted>
---

Changes since v1:
- RFSA device represented direclty by the reserved-memory node

 drivers/of/platform.c     |   1 +
 drivers/soc/qcom/Kconfig  |   8 ++
 drivers/soc/qcom/Makefile |   1 +
 drivers/soc/qcom/rfsa.c   | 262 ++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 272 insertions(+)
 create mode 100644 drivers/soc/qcom/rfsa.c
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 8c241a116b08..0356f31b07db 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -498,6 +498,7 @@ EXPORT_SYMBOL_GPL(of_platform_default_populate);
 
 #ifndef CONFIG_PPC
 static const char *rmem_compats[] = {
+	"qcom,rfsa",
 	"ramoops",
 	NULL
 };
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 9fca977ef18d..788a63cd430e 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -24,6 +24,14 @@ config QCOM_PM
 	  modes. It interface with various system drivers to put the cores in
 	  low power modes.
 
+config QCOM_RFSA
+	tristate "Qualcomm Remote Filesystem Access driver"
+	help
+	  The Qualcomm remote filesystem access driver is used for allocating
+	  and exposing regions of shared memory with remote processors for the
+	  purpose of exchanging sector-data between the remote filesystem
+	  service and its clients.
+
 config QCOM_SMEM
 	tristate "Qualcomm Shared Memory Manager (SMEM)"
 	depends on ARCH_QCOM
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 414f0de274fa..d1bbc791ddc0 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1,6 +1,7 @@
 obj-$(CONFIG_QCOM_GSBI)	+=	qcom_gsbi.o
 obj-$(CONFIG_QCOM_MDT_LOADER)	+= mdt_loader.o
 obj-$(CONFIG_QCOM_PM)	+=	spm.o
+obj-$(CONFIG_QCOM_RFSA)	+=	rfsa.o
 obj-$(CONFIG_QCOM_SMD_RPM)	+= smd-rpm.o
 obj-$(CONFIG_QCOM_SMEM) +=	smem.o
 obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
diff --git a/drivers/soc/qcom/rfsa.c b/drivers/soc/qcom/rfsa.c
new file mode 100644
index 000000000000..1b9ec33cde48
--- /dev/null
+++ b/drivers/soc/qcom/rfsa.c
@@ -0,0 +1,262 @@
+/*
+ * Copyright (c) 2017 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/cdev.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/of_fdt.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/qcom_scm.h>
+
+#define QCOM_RFSA_DEV_MAX	(MINORMASK + 1)
+
+static dev_t qcom_rfsa_major;
+
+struct qcom_rfsa {
+	struct device dev;
+	struct cdev cdev;
+
+	void *base;
+	phys_addr_t addr;
+	phys_addr_t size;
+
+	unsigned int client_id;
+};
+
+static ssize_t qcom_rfsa_show(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf);
+
+static DEVICE_ATTR(phys_addr, 0400, qcom_rfsa_show, NULL);
+static DEVICE_ATTR(size, 0400, qcom_rfsa_show, NULL);
+static DEVICE_ATTR(client_id, 0400, qcom_rfsa_show, NULL);
+
+static ssize_t qcom_rfsa_show(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	struct qcom_rfsa *rfsa = container_of(dev, struct qcom_rfsa, dev);
+
+	if (attr == &dev_attr_phys_addr)
+		return sprintf(buf, "%pa\n", &rfsa->addr);
+	if (attr == &dev_attr_size)
+		return sprintf(buf, "%pa\n", &rfsa->size);
+	if (attr == &dev_attr_client_id)
+		return sprintf(buf, "%d\n", rfsa->client_id);
+
+	return -EINVAL;
+}
+
+static struct attribute *qcom_rfsa_attrs[] = {
+	&dev_attr_phys_addr.attr,
+	&dev_attr_size.attr,
+	&dev_attr_client_id.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(qcom_rfsa);
+
+static int qcom_rfsa_open(struct inode *inode, struct file *filp)
+{
+	struct qcom_rfsa *rfsa = container_of(inode->i_cdev, struct qcom_rfsa, cdev);
+
+	get_device(&rfsa->dev);
+	filp->private_data = rfsa;
+
+	return 0;
+}
+static ssize_t qcom_rfsa_read(struct file *filp,
+			      char __user *buf, size_t count, loff_t *f_pos)
+{
+	struct qcom_rfsa *rfsa = filp->private_data;
+
+	if (*f_pos >= rfsa->size)
+		return 0;
+
+	if (*f_pos + count >= rfsa->size)
+		count = rfsa->size - *f_pos;
+
+	if (copy_to_user(buf, rfsa->base + *f_pos, count))
+		return -EFAULT;
+
+	*f_pos += count;
+	return count;
+}
+
+static ssize_t qcom_rfsa_write(struct file *filp,
+			       const char __user *buf, size_t count,
+			       loff_t *f_pos)
+{
+	struct qcom_rfsa *rfsa = filp->private_data;
+
+	if (*f_pos >= rfsa->size)
+		return 0;
+
+	if (*f_pos + count >= rfsa->size)
+		count = rfsa->size - *f_pos;
+
+	if (copy_from_user(rfsa->base + *f_pos, buf, count))
+		return -EFAULT;
+
+	*f_pos += count;
+	return count;
+}
+
+static int qcom_rfsa_release(struct inode *inode, struct file *filp)
+{
+	struct qcom_rfsa *rfsa = filp->private_data;
+
+	put_device(&rfsa->dev);
+
+	return 0;
+}
+
+static const struct file_operations qcom_rfsa_fops = {
+	.owner = THIS_MODULE,
+	.open = qcom_rfsa_open,
+	.read = qcom_rfsa_read,
+	.write = qcom_rfsa_write,
+	.release = qcom_rfsa_release,
+	.llseek = default_llseek,
+};
+
+static void qcom_rfsa_release_device(struct device *dev)
+{
+	struct qcom_rfsa *rfsa = container_of(dev, struct qcom_rfsa, dev);
+
+	kfree(rfsa);
+}
+
+static int qcom_rfsa_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct reserved_mem *rmem;
+	struct qcom_rfsa *rfsa;
+	u32 client_id;
+	int ret;
+
+	rmem = of_reserved_mem_get(node);
+	if (!rmem) {
+		dev_err(&pdev->dev, "failed to acquire memory region\n");
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32(node, "qcom,client-id", &client_id);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to parse \"qcom,client-id\"\n");
+		return ret;
+
+	}
+
+	rfsa = kzalloc(sizeof(*rfsa), GFP_KERNEL);
+	if (!rfsa)
+		return -ENOMEM;
+
+	rfsa->addr = rmem->base;
+	rfsa->client_id = client_id;
+	rfsa->size = rmem->size;
+
+	device_initialize(&rfsa->dev);
+	rfsa->dev.parent = &pdev->dev;
+	rfsa->dev.groups = qcom_rfsa_groups;
+
+	cdev_init(&rfsa->cdev, &qcom_rfsa_fops);
+	rfsa->cdev.owner = THIS_MODULE;
+
+	dev_set_name(&rfsa->dev, "qcom_rfsa%d", client_id);
+	rfsa->dev.id = client_id;
+	rfsa->dev.devt = MKDEV(MAJOR(qcom_rfsa_major), client_id);
+
+	ret = cdev_device_add(&rfsa->cdev, &rfsa->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add cdev: %d\n", ret);
+		put_device(&rfsa->dev);
+		return ret;
+	}
+
+	rfsa->dev.release = qcom_rfsa_release_device;
+
+	rfsa->base = devm_memremap(&rfsa->dev, rfsa->addr, rfsa->size, MEMREMAP_WC);
+	if (IS_ERR(rfsa->base)) {
+		dev_err(&pdev->dev, "failed to remap rfsa region\n");
+
+		device_del(&rfsa->dev);
+		put_device(&rfsa->dev);
+
+		return PTR_ERR(rfsa->base);
+	}
+
+	dev_set_drvdata(&pdev->dev, rfsa);
+
+	return 0;
+}
+
+static int qcom_rfsa_remove(struct platform_device *pdev)
+{
+	struct qcom_rfsa *rfsa = dev_get_drvdata(&pdev->dev);
+
+	cdev_del(&rfsa->cdev);
+	device_del(&rfsa->dev);
+	put_device(&rfsa->dev);
+
+	return 0;
+}
+
+static const struct of_device_id qcom_rfsa_of_match[] = {
+	{ .compatible = "qcom,rfsa" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, qcom_rfsa_of_match);
+
+static struct platform_driver qcom_rfsa_driver = {
+	.probe = qcom_rfsa_probe,
+	.remove = qcom_rfsa_remove,
+	.driver  = {
+		.name  = "qcom_rfsa",
+		.of_match_table = qcom_rfsa_of_match,
+	},
+};
+
+static int qcom_rfsa_init(void)
+{
+	int ret;
+
+	ret = alloc_chrdev_region(&qcom_rfsa_major, 0, QCOM_RFSA_DEV_MAX,
+				  "qcom_rfsa");
+	if (ret < 0) {
+		pr_err("qcom_rfsa: failed to allocate char dev region\n");
+		return ret;
+	}
+
+	ret = platform_driver_register(&qcom_rfsa_driver);
+	if (ret < 0) {
+		pr_err("qcom_rfsa: failed to register rfsa driver\n");
+		unregister_chrdev_region(qcom_rfsa_major, QCOM_RFSA_DEV_MAX);
+	}
+
+	return ret;
+}
+module_init(qcom_rfsa_init);
+
+static void qcom_rfsa_exit(void)
+{
+	platform_driver_unregister(&qcom_rfsa_driver);
+	unregister_chrdev_region(qcom_rfsa_major, QCOM_RFSA_DEV_MAX);
+}
+module_exit(qcom_rfsa_exit);
-- 
2.12.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help