[PATCH 1/2] ARM: dts: sun8i: h3: Enable USB OTG on the Beelink X2
From: <hidden>
Date: 2017-07-23 14:49:49
Also in:
linux-arm-kernel
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Marcus Cooper <redacted> This STB has a type A socket which acts as OTG. Signed-off-by: Marcus Cooper <redacted> --- arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index e7fae65eb5d3..87d7f2cdefa6 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts@@ -100,6 +100,10 @@ }; }; +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; };
@@ -147,10 +151,19 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &ohci1 { status = "okay"; }; +®_usb0_vbus { + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; +}; + &spdif { pinctrl-names = "default"; pinctrl-0 = <&spdif_tx_pins_a>;
@@ -163,7 +176,15 @@ status = "okay"; }; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { - /* USB VBUS is on as long as VCC-IO is on */ + /* USB VBUS is always on except for the OTG port */ status = "okay"; + usb0_id_det-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA07 */ + usb0_vbus-supply = <®_usb0_vbus>; };
--
2.13.3