[PATCH 1/4] dt-bindings: document the tegra CEC bindings
From: Hans Verkuil <hidden>
Date: 2017-07-15 12:47:50
Also in:
dri-devel, linux-media, linux-tegra
Subsystem:
media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, the rest · Maintainers:
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2017-07-17 · Re: [PATCH 1/4] dt-bindings: document the tegra CEC bindings · Rob Herring <hidden>
From: Hans Verkuil <redacted> This documents the binding for the Tegra CEC module. Signed-off-by: Hans Verkuil <redacted> --- .../devicetree/bindings/media/tegra-cec.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/tegra-cec.txt
diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt
new file mode 100644
index 000000000000..ba0b6071acaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/tegra-cec.txt@@ -0,0 +1,26 @@ +* Tegra HDMI CEC driver + +The HDMI CEC module is present in Tegra SoCs and its purpose is to +handle communication between HDMI connected devices over the CEC bus. + +Required properties: + - compatible : value should be one of the following: + "nvidia,tegra114-cec" + "nvidia,tegra124-cec" + "nvidia,tegra210-cec" + - reg : Physical base address of the IP registers and length of memory + mapped region. + - interrupts : HDMI CEC interrupt number to the CPU. + - clocks : from common clock binding: handle to HDMI CEC clock. + - clock-names : from common clock binding: must contain "cec", + corresponding to ithe entry in the clocks property. + - hdmi-phandle : phandle to the HDMI controller, see also cec.txt. + +Example: + +tegra_cec { + compatible = "nvidia,tegra124-cec"; + reg = <0x0 0x70015000 0x0 0x00001000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_CEC>; + clock-names = "cec";
--
2.11.0