Hi Icenowy,

icenowy-h8G6r0blFSE@public.gmane.org píše v Čt 20. 07. 2017 v 16:21 +0800:

在 2017-07-20 06:59，Ondřej Jirman 写道：

quoted

Hi,

Icenowy Zheng píše v Út 04. 04. 2017 v 17:50 +0800:

quoted

From: Icenowy Zheng <redacted>

Now we have driver for the PRCM CCU, switch to use it instead of
old-style clock nodes for apb0-related clocks in sunxi-h3-h5.dtsi .

The mux 3 of R_CCU is still the internal oscillator, which is said to 
be
16MHz plus minus 30%, and get a measured value of 15MHz~16MHz on my 
two
H3 boards and one H5 board.

There's issue with the new r_ccu that breaks r_i2c. (no devices can be
found on the bus). Reverting this patch fixes the issue with the I2C
controller. (everything else being the same)

Here's the code I'm using: https://github.com/megous/linux/commits/oran
ge-pi-4.12

The last commit is the revert.

The issue manifests itself by non-working DVFS, because kernel lacks
access to SY8106A regulator, because r_i2c doesn't work with sunxi-ng
clock driver (sun8i-r).

Relevant difference in registers between working/non-working state is
just this (diff -u):

 0x01f02400 = 0x00000000
 0x01f02404 = 0x00000000
-0x01f02408 = 0x00000091
+0x01f02408 = 0x00000095 DATA register inisde the I2C controller
 0x01f0240c = 0x00000044
 0x01f02410 = 0x000000f8
-0x01f02414 = 0x00000059
+0x01f02414 = 0x00000000 CLOCK setup register inside the I2C controller
 0x01f02418 = 0x00000000
 0x01f0241c = 0x00000000
 0x01f02420 = 0x0000003a

It looks like the new sunxi-ng clock driver causes the I2C driver to
not correctly configure the CLOCK register. I don't know why and I'm
not sure how to deal with this. Any ideas what can I do next?

Could you apply the patches at [1] and [2] to U-Boot and re-try with
r_ccu? They switched the CPUs clock of r_ccu to non-secure mode, which
makes it possible to be accessed from the kernel running in non-secure.

I have verified that r_ccu works correctly with the u-boot patches on
H3 and H5.

Thank you very much for looking into the issue. :)

regards,
  o.

I think these patches can solve this problem.

[1] https://patchwork.ozlabs.org/patch/791414/
[2] https://patchwork.ozlabs.org/patch/791415/

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.