On Tue, 2017-07-18 at 18:29 +0200, Matthias Brugger wrote:

On 06/22/2017 11:32 AM, YT Shen wrote:

quoted

This adds basic chip support for Mediatek 2712

Signed-off-by: YT Shen <yt.shen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
  arch/arm64/boot/dts/mediatek/Makefile       |   1 +
  arch/arm64/boot/dts/mediatek/mt2712-evb.dts |  32 ++++++
  arch/arm64/boot/dts/mediatek/mt2712e.dtsi   | 172 ++++++++++++++++++++++++++++
  3 files changed, 205 insertions(+)
  create mode 100644 arch/arm64/boot/dts/mediatek/mt2712-evb.dts
  create mode 100644 arch/arm64/boot/dts/mediatek/mt2712e.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 9fbfd32..fcc0604 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile

@@ -1,3 +1,4 @@
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb

diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
new file mode 100644
index 0000000..8c804df
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts

@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: YT Shen <yt.shen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include "mt2712e.dtsi"
+
+/ {
+	model = "MediaTek MT2712 evaluation board";
+	compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+

diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
new file mode 100644
index 0000000..461ee0f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi

@@ -0,0 +1,172 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: YT Shen <yt.shen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "mediatek,mt2712";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x001>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			      (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			      (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			      (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			      (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		uart5: serial@1000f000 {
+			compatible = "mediatek,mt2712-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x1000f000 0 0x400>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};

So baud and bus clock are both 26 MHz?

We didn't have CCF clock support in this series.
After we have clock source support, we could use the correct clocks to
the UARTs and drop the 26MHz fixed rate UART clock.

The bus clock is 26MHz.  The baud clock could be from another clock
source, using the same 26MHz fixed clock works also.


[1] https://patchwork.kernel.org/patch/9670877/
[2] https://patchwork.kernel.org/patch/6436021/

Regards,
Matthias

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html