Re: [PATCH 2/4] dt-bindings: iio: humidity: Add bindings for HTU21 and MS8607 sensors

On Wed, 21 Jun 2017 22:05:13 -0500
Rob Herring [off-list ref] wrote:

On Wed, Jun 21, 2017 at 2:40 PM, Jonathan Cameron [off-list ref] wrote:

quoted

On Sun, 18 Jun 2017 09:05:11 -0500
Rob Herring [off-list ref] wrote:
 

quoted

On Tue, Jun 13, 2017 at 10:50:43PM +0530, Manivannan Sadhasivam wrote:  

quoted

Add device tree bindings for Measurement-Specialties HTU21 temperature & humidity sensor and humidity part of MS8607 sensor

Signed-off-by: Manivannan Sadhasivam <redacted>
---
 Documentation/devicetree/bindings/iio/humidity/htu21.txt | 13 +++++++++++++
 1 file changed, 13 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/humidity/htu21.txt

diff --git a/Documentation/devicetree/bindings/iio/humidity/htu21.txt b/Documentation/devicetree/bindings/iio/humidity/htu21.txt
new file mode 100644
index 0000000..97d7963
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/humidity/htu21.txt

@@ -0,0 +1,13 @@
+*HTU21 - Measurement-Specialties htu21 temperature & humidity sensor and humidity part of MS8607 sensor  

The binding should be for the device, not part of it. You should bind
to a driver for MS8607 and then create 2 child devices for the humidity
and temp sensors.  

Hi Rob,

It's a bit of an oddity as we are look at package in package parts.
Really there are simply two parts here. There is no need to know
they are in the same package.  Obviously we 'could' describe this, but
it's no different form  mounting the chips next to each other on the
same bus sharing the same power rails.  

Okay, then it is fine as-is.

Rob

Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks Rob for getting back to me on this.

Jonathan

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html