Re: [PATCH 2/5] dt-bindings: phy-hisi-inno-usb2: add support for hisi-inno-usb2 phy
From: Rob Herring <robh@kernel.org>
Date: 2017-06-26 15:56:56
Also in:
linux-arm-kernel, linux-clk, lkml
On Wed, Jun 21, 2017 at 05:00:42PM +0800, Jiancheng Xue wrote:
quoted hunk ↗ jump to hunk
Add support for hisi-inno-usb2 phy. Signed-off-by: Jiancheng Xue <redacted> --- .../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txtdiff --git a/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt new file mode 100644 index 0000000..21f8208 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt@@ -0,0 +1,36 @@ +HiSilicon INNO USB2 PHY +----------------------- +Required properties: +- compatible: Should be one of the following strings: + "hisilicon,inno-usb2-phy", + "hisilicon,hi3798cv200-usb2-phy", +- #phy-cells: Must be 0 +- hisilicon,peripheral-syscon: Phandle of syscon used to control phy. +- clocks: Phandle and clock specifier pair for reference clock utmi_refclk. +- resets: List of phandle and reset specifier pairs for each reset signal in +reset-names. +- reset-names: Should be "por_rst" and "test_rst". The test_rst only +exists in some of SOCs, so it is optional.
_rst is redundant.
+
+Phy node can include up to four subnodes. Each subnode represents one port.
+The required properties of port node are as follows:
+- clocks: Phandle and clock specifier pair for utmi_clock.
+- resets: List of phandle and reset specifier pairs for port reset and utmi reset.
+- reset-names: List of reset signal names. Should be "port_rst" and "utmi_rst"
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+usb_phy: phy {
+ compatible = "hisilicon,inno_usb2_phy";Doesn't match the above compatible.
+ #phy-cells = <0>;
+ hisilicon,peripheral-syscon = <&peri_ctrl>;
+ clocks = <&crg USB2_REF_CLK>;
+ resets = <&crg 0xb4 2>;
+ reset-names = "por_rst";
+ port0 {port@0 and provide a reg property.
+ clocks = <&crg USB2_UTMI0_CLK>; + resets = <&crg 0xb4 5>, <&crg 0xb4 1>; + reset-names = "port_rst", "utmi_rst"; + }; + }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html