[PATCH 4/4] net: dsa: bcm_sf2: Remove special handling of "internal" phy-mode
flat view
STALE3407d
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-06-23 17:32:32
Also in:
lkml, netdev
Subsystem:
broadcom b53/sf2 ethernet switch driver, networking drivers, networking [dsa], the rest · Maintainers:
Florian Fainelli, Jonas Gorski, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds
Revision v1 of 2 in this series.
Revisions (2)
- v1 current
- v1
The PHY library now supports an "internal" phy-mode, thus making our custom parsing code now unnecessary. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/dsa/bcm_sf2.c | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 76e98e8ed315..648f91b58d1e 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c@@ -498,10 +498,8 @@ static void bcm_sf2_identify_ports(struct bcm_sf2_priv *priv, struct device_node *dn) { struct device_node *port; - const char *phy_mode_str; int mode; unsigned int port_num; - int ret; priv->moca_port = -1;
@@ -515,15 +513,11 @@ static void bcm_sf2_identify_ports(struct bcm_sf2_priv *priv, * time */ mode = of_get_phy_mode(port); - if (mode < 0) { - ret = of_property_read_string(port, "phy-mode", - &phy_mode_str); - if (ret < 0) - continue; - - if (!strcasecmp(phy_mode_str, "internal")) - priv->int_phy_mask |= 1 << port_num; - } + if (mode < 0) + continue; + + if (mode == PHY_INTERFACE_MODE_INTERNAL) + priv->int_phy_mask |= 1 << port_num; if (mode == PHY_INTERFACE_MODE_MOCA) priv->moca_port = port_num;
--
2.9.3