On Wed, May 31, 2017 at 02:33:57PM -0500, Nathan Sullivan wrote:

Support the National Instruments 169445 board.

Signed-off-by: Nathan Sullivan <redacted>
---

Changes from v4:

- Address Rob Herring's device tree feedback

I'm still unclear on the vmlinux.its.S changes.  The linux-mti tree has a
config in the image tree for each board it supports, and I followed that
pattern here.  Rob was concerned about how the configs would scale wrt
the number of bootloaders around, but it's really just one per board/dt,
right?

It was more just a comment if I was MIPS maintainer, but I'm not so for 
the DT parts:

Acked-by: Rob Herring <robh@kernel.org>

---
 Documentation/devicetree/bindings/mips/ni.txt   |   7 ++
 MAINTAINERS                                     |   8 ++
 arch/mips/boot/dts/Makefile                     |   1 +
 arch/mips/boot/dts/ni/169445.dts                | 100 ++++++++++++++++++++++++
 arch/mips/boot/dts/ni/Makefile                  |   7 ++
 arch/mips/configs/generic/board-ni169445.config |  27 +++++++
 arch/mips/generic/Kconfig                       |   6 ++
 arch/mips/generic/vmlinux.its.S                 |  25 ++++++
 8 files changed, 181 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mips/ni.txt
 create mode 100644 arch/mips/boot/dts/ni/169445.dts
 create mode 100644 arch/mips/boot/dts/ni/Makefile
 create mode 100644 arch/mips/configs/generic/board-ni169445.config