Re: [PATCH][v3] arm64: Add flash node for ls1088a qds and rdb
From: Shawn Guo <hidden>
Date: 2017-05-12 03:21:41
Also in:
linux-arm-kernel
On Wed, May 10, 2017 at 03:13:23PM +0530, Prabhakar Kushwaha wrote:
LS1088AQDS consist of NOR, NAND and FPGA connected over IFC LS1088ARDB consist of NAND and FPGA connected over IFC. So add flash information in ifc node of device tree. Signed-off-by: Prabhakar Kushwaha <redacted>
The subject prefix should be like 'arm64: dts: ...'.
quoted hunk
--- changes for v2: Incorporated Shawn's comments changes for v3: Incorporated Shawn's further comments arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 24 +++++++++++++++++++++++ arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 16 +++++++++++++++ arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 5 +---- 3 files changed, 41 insertions(+), 4 deletions(-)diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts index 8c3cae5..82e1615 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts@@ -110,6 +110,30 @@ }; }; +&ifc { + ranges = <0 0 0x5 0x80000000 0x08000000 + 2 0 0x5 0x30000000 0x00010000 + 3 0 0x5 0x20000000 0x00010000>; + status = "okay"; + + nor@0,0 { + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + fpga: board-control@3,0 { + compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis"; + reg = <0x3 0x0 0x0000100>; + }; +}; + &duart0 { status = "okay"; };diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 8a04fbb..a93a588 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts@@ -94,6 +94,22 @@ }; }; +&ifc { + ranges = <0 0 0x5 0x30000000 0x00010000 + 2 0 0x5 0x20000000 0x00010000>; + status = "okay"; + + nand@0,0 { + compatible = "fsl,ifc-nand"; + reg = <0x0 0x0 0x10000>; + }; + + fpga: board-control@2,0 { + compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis"; + reg = <0x2 0x0 0x0000100>; + }; +}; + &duart0 { status = "okay"; };diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 2946fd7..e852b22 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi@@ -216,11 +216,8 @@ little-endian; #address-cells = <2>; #size-cells = <1>; - - ranges = <0 0 0x5 0x80000000 0x08000000 - 2 0 0x5 0x30000000 0x00010000 - 3 0 0x5 0x20000000 0x00010000>; status = "disabled"; +
This is an unrelated change, and should be dropped. I fixed those up and applied patch. Shawn
};
i2c0: i2c@2000000 {
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel-- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html