[PATCH 5/5] arm64: dts: marvell: use new binding for the system controller on ap806
From: Gregory CLEMENT <hidden>
Date: 2017-05-19 15:58:52
Also in:
linux-arm-kernel, linux-clk, lkml
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
The new binding for the system controller on ap806 moved the clock into a subnode. This preliminary step will allow to add gpio and pinctrl subnodes Reviewed-by: Thomas Petazzoni <redacted> Signed-off-by: Gregory CLEMENT <redacted> --- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 0c25ec62a2a3..205037e3e7dc 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi@@ -193,7 +193,7 @@ #size-cells = <0>; cell-index = <0>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ap_syscon 3>; + clocks = <&ap_clk 3>; status = "disabled"; };
@@ -204,7 +204,7 @@ #size-cells = <0>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; timeout-ms = <1000>; - clocks = <&ap_syscon 3>; + clocks = <&ap_clk 3>; status = "disabled"; };
@@ -214,7 +214,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; - clocks = <&ap_syscon 3>; + clocks = <&ap_clk 3>; status = "disabled"; };
@@ -224,7 +224,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; - clocks = <&ap_syscon 3>; + clocks = <&ap_clk 3>; status = "disabled"; };
@@ -234,17 +234,20 @@ reg = <0x6e0000 0x300>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core"; - clocks = <&ap_syscon 4>; + clocks = <&ap_clk 4>; dma-coherent; marvell,xenon-phy-slow-mode; status = "disabled"; }; ap_syscon: system-controller@6f4000 { - compatible = "marvell,ap806-system-controller", - "syscon"; - #clock-cells = <1>; + compatible = "syscon", "simple-mfd"; reg = <0x6f4000 0x1000>; + + ap_clk: clock { + compatible = "marvell,ap806-clock"; + #clock-cells = <1>; + }; }; }; };
--
git-series 0.9.1