[PATCH v5 14/17] dt-bindings: slave-device: add current-speed property
From: Stefan Wahren <hidden>
Date: 2017-05-10 08:58:11
Also in:
linux-serial, lkml, netdev
Subsystem:
open firmware and flattened device tree bindings, the rest, tty layer and serial drivers · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
This adds a new DT property to define the current baud rate of the slave device. Signed-off-by: Stefan Wahren <redacted> --- Documentation/devicetree/bindings/serial/slave-device.txt | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/serial/slave-device.txt b/Documentation/devicetree/bindings/serial/slave-device.txt
index f660379..40110e0 100644
--- a/Documentation/devicetree/bindings/serial/slave-device.txt
+++ b/Documentation/devicetree/bindings/serial/slave-device.txt@@ -21,6 +21,15 @@ Optional Properties: can support. For example, a particular board has some signal quality issue or the host processor can't support higher baud rates. +- current-speed : The current baud rate the device operates at. This should + only be present in case a driver has no chance to know + the baud rate of the slave device. + Examples: + * device supports auto-baud + * the rate is setup by a bootloader and there is no + way to reset the device + * device baud rate is configured by its firmware but + there is no way to request the actual settings Example:
--
2.1.4