Thread (43 messages) 43 messages, 4 authors, 2017-05-12
STALE3326d REVIEWED: 1 (0M)
Revisions (3)
  1. v1 [diff vs current]
  2. v2 current
  3. v3 [diff vs current]

[PATCH v2 12/20] drm/sun4i: tcon: Fix tcon channel 1 backporch calculation

From: Maxime Ripard <hidden>
Date: 2017-05-03 12:01:33
Also in: dri-devel, linux-arm-kernel, linux-clk, lkml
Subsystem: drm drivers, drm drivers and misc gpu patches, drm drivers for allwinner a10, the rest · Maintainers: David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Chen-Yu Tsai, Linus Torvalds

It seems like what's called a backporch in the datasheet is actually the
backporch plus the sync period. Fix that in our driver.

Acked-by: Chen-Yu Tsai <redacted>
Signed-off-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 1c609d808b86..86a806fae9fb 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -262,7 +262,7 @@ void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon,
 		     SUN4I_TCON1_BASIC2_Y(mode->crtc_vdisplay));
 
 	/* Set horizontal display timings */
-	bp = mode->crtc_htotal - mode->crtc_hsync_end;
+	bp = mode->crtc_htotal - mode->crtc_hsync_start;
 	DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n",
 			 mode->htotal, bp);
 	regmap_write(tcon->regs, SUN4I_TCON1_BASIC3_REG,
@@ -270,7 +270,7 @@ void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon,
 		     SUN4I_TCON1_BASIC3_H_BACKPORCH(bp));
 
 	/* Set vertical display timings */
-	bp = mode->crtc_vtotal - mode->crtc_vsync_end;
+	bp = mode->crtc_vtotal - mode->crtc_vsync_start;
 	DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n",
 			 mode->vtotal, bp);
 	regmap_write(tcon->regs, SUN4I_TCON1_BASIC4_REG,
-- 
git-series 0.8.11
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help