Re: [PATCH 1/2] extcon: usb-gpio: Add level trigger support

Hi Rob,

On 29 March 2017 at 14:08, Baolin Wang [off-list ref] wrote:

Hi,

On 24 March 2017 at 20:41, Rob Herring [off-list ref] wrote:

quoted

On Fri, Mar 24, 2017 at 6:56 AM, Baolin Wang [off-list ref] wrote:

quoted

Hi,

On 24 March 2017 at 19:08, Chanwoo Choi [off-list ref] wrote:

quoted

Hi,

On 2017년 03월 20일 16:59, Baolin Wang wrote:

quoted

Now extcon-usb-gpio only supports for GPIO egdge trigger, but VBUS/ID
gpios' detection can be triggered by the level trigger on some platforms.
Thus intoduce one property 'extcon-gpio,level-trigger' to identify this
situation.

Signed-off-by: Baolin Wang <redacted>
---
 .../devicetree/bindings/extcon/extcon-usb-gpio.txt |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
index dfc14f7..191504b 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt

@@ -9,6 +9,9 @@ Required properties:
 Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
 - id-gpio: gpio for USB ID pin. See gpio binding.
 - vbus-gpio: gpio for USB VBUS pin.
+- extcon-gpio,level-trigger: Boolean, set this gpio's interrupt flag to

It is 'extcon-usb-gpio' instead of 'extcon-gpio'.

Sure.

"extcon-gpio" is not a vendor, so don't make it a vendor prefix.

OK.

quoted

quoted

quoted

quoted

+level trigger. If not specified defaults to false, gpio's interrupt flag
+defaults to edge trigger.

I understand why you need the new flag.
But, I'm not sure it is right way to add the new flag for interrupt flag.

IMHO, I think that we need to find the more proper way to get the interrupt flag
or maybe, we may need to implement the new helper api to get the interrupt
flag for gpio pin when we use the gpio as the interrupt source,

Yes, I agree with you. We already have helper functions to get
interrupt flag from device tree, but we can not get the irq number of
GPIO to configure in device tree, then I introduce one new flag to
indicate the trigger type. But I like to change the patch if there are
any good suggestion. Thanks.

The extcon binding needs an overhaul in general. I'm not going to take
extensions to a broken binding. What's needed is a USB connector
binding like we have for HDMI and other video connectors. And for
USB-C, those need to be combined.

Could you elaborate on how to make an overhaul for the extcon binding?
I can help to do that and then we can consider to modify my patch.
Thanks.

I am not sure I understand your points correctly, could you elaborate
on how to modify for extcon? Thanks.

--
Baolin.wang
Best Regards

-- 
Baolin.wang
Best Regards
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html