Re: [PATCH v7 5/7] coresight: add support for CPU debug module

+static void debug_force_cpu_powered_up(struct debug_drvdata *drvdata)
+{
+	u32 edprcr;
+
+try_again:
+
+	/*
+	 * Send request to power management controller and assert
+	 * DBGPWRUPREQ signal; if power management controller has
+	 * sane implementation, it should enable CPU power domain
+	 * in case CPU is in low power state.
+	 */
+	edprcr = readl_relaxed(drvdata->base + EDPRCR);
+	edprcr |= EDPRCR_COREPURQ;
+	writel_relaxed(edprcr, drvdata->base + EDPRCR);
+
+	/* Wait for CPU to be powered up (timeout~=32ms) */
+	if (readx_poll_timeout_atomic(readl_relaxed, drvdata->base + EDPRSR,
+			drvdata->edprsr, (drvdata->edprsr & EDPRSR_PU),
+			DEBUG_WAIT_SLEEP, DEBUG_WAIT_TIMEOUT)) {
+		/*
+		 * Unfortunately the CPU cannot be powered up, so return
+		 * back and later has no permission to access other
+		 * registers. For this case, should disable CPU low power
+		 * states to ensure CPU power domain is enabled!
+		 */
+		pr_err("%s: power up request for CPU%d failed\n",
+			__func__, drvdata->cpu);
+		return;
+	}
+
+	/*
+	 * At this point the CPU is powered up, so set the no powerdown
+	 * request bit so we don't lose power and emulate power down.
+	 */
+	edprcr = readl_relaxed(drvdata->base + EDPRCR);
+	edprcr |= EDPRCR_COREPURQ | EDPRCR_CORENPDRQ;
+	writel_relaxed(edprcr, drvdata->base + EDPRCR);
+
+	drvdata->edprsr = readl_relaxed(drvdata->base + EDPRSR);
+
+	/* The core power domain got switched off on use, try again */
+	if (unlikely(!drvdata->edprsr & EDPRSR_PU))