Re: [PATCH 3/3] ARM: dts: omap4-droid4: Add CPCAP PMIC OTG PHY configuration
From: Sebastian Reichel <hidden>
Date: 2017-03-22 02:20:52
Also in:
linux-omap
Hi, On Thu, Mar 16, 2017 at 09:10:12PM -0700, Tony Lindgren wrote:
Add CPCAP PMIC OTG PHY configuration. Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Marcel Partap <redacted> Cc: Michael Scott <redacted> Cc: Sebastian Reichel <redacted> Signed-off-by: Tony Lindgren <redacted>
Reviewed-by: Sebastian Reichel <redacted> Tested-by: Sebastian Reichel <redacted> -- Sebastian
quoted hunk
--- arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi@@ -65,6 +65,29 @@ interrupts = <23 IRQ_TYPE_NONE>; }; + cpcap_usb2_phy: phy { + compatible = "motorola,mapphone-cpcap-usb-phy"; + pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>; + pinctrl-1 = <&usb_ulpi_pins>; + pinctrl-2 = <&usb_utmi_pins>; + pinctrl-3 = <&uart3_pins>; + pinctrl-names = "default", "ulpi", "utmi", "uart"; + #phy-cells = <0>; + interrupts-extended = < + &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0 + &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0 + &cpcap 48 1 + >; + interrupt-names = + "id_ground", "id_float", "se0conn", "vbusvld", + "sessvld", "sessend", "se1", "dm", "dp"; + mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH + &gpio1 0 GPIO_ACTIVE_HIGH>; + io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>; + io-channel-names = "vbus", "id"; + vusb-supply = <&vusb>; + }; + led_red: led-red { compatible = "motorola,cpcap-led-red"; vdd-supply = <&sw5>;-- 2.11.1
Attachments
- signature.asc [application/pgp-signature] 833 bytes