Re: [PATCH 0/2] mtd: spi-nor: add stm32 qspi driver

Hi Ludovic,

Le 27/03/2017 à 14:54, Ludovic Barre a écrit :

From: Ludovic Barre <redacted>

This patch set adds a SPI-NOR driver for stm32 QSPI controller.
It is a specialized SPI interface for serial Flash devices.
It supports 1 or 2 Flash device with single, dual and quad SPI Flash memories.

It can operate in any of the following modes:
-indirect mode: all the operations are performed using the quadspi
 registers
-read memory-mapped mode: the external Flash memory is mapped to the
 microcontroller address space and is seen by the system as if it was
 an internal memory

Ludovic Barre (2):
  dt-bindings: Document the STM32 QSPI bindings
  mtd: spi-nor: add driver for STM32 quad spi flash controller

 .../devicetree/bindings/mtd/stm32-quadspi.txt      |  45 ++
 drivers/mtd/spi-nor/Kconfig                        |   7 +
 drivers/mtd/spi-nor/Makefile                       |   1 +
 drivers/mtd/spi-nor/stm32-quadspi.c                | 679 +++++++++++++++++++++
 4 files changed, 732 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/stm32-quadspi.txt
 create mode 100644 drivers/mtd/spi-nor/stm32-quadspi.c

Just a small word to warn you that I'm likely to ask you to rebase this
series onto the patch "mtd: spi-nor: introduce more SPI protocols and
the Dual Transfer Mode". Indeed, I need to synchronize with Marek first
but I plan to merge this patch within few days.


Best regards,

Cyrille
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html