[PATCH v2 1/8] watchdog: s3c2410: Remove confusing CONFIG prefix from local defines
From: Krzysztof Kozlowski <krzk@kernel.org>
Date: 2017-03-11 17:26:25
Also in:
linux-arm-kernel, linux-samsung-soc, linux-watchdog, lkml
Subsystem:
arm/samsung s3c, s5p and exynos arm architectures, the rest, watchdog device drivers · Maintainers:
Krzysztof Kozlowski, Linus Torvalds, Wim Van Sebroeck, Guenter Roeck
The CONFIG prefix from defines in the s3c2410_wdt.c might suggest that these constants come from Kconfig. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> --- drivers/watchdog/s3c2410_wdt.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 59e95762a6de..3e216f54cb6f 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c@@ -64,8 +64,8 @@ #define S3C2410_WTCON_PRESCALE_MASK (0xff << 8) #define S3C2410_WTCON_PRESCALE_MAX 0xff -#define CONFIG_S3C2410_WATCHDOG_ATBOOT (0) -#define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME (15) +#define S3C2410_WATCHDOG_ATBOOT (0) +#define S3C2410_WATCHDOG_DEFAULT_TIME (15) #define EXYNOS5_RST_STAT_REG_OFFSET 0x0404 #define EXYNOS5_WDT_DISABLE_REG_OFFSET 0x0408
@@ -79,7 +79,7 @@ static bool nowayout = WATCHDOG_NOWAYOUT; static int tmr_margin; -static int tmr_atboot = CONFIG_S3C2410_WATCHDOG_ATBOOT; +static int tmr_atboot = S3C2410_WATCHDOG_ATBOOT; static int soft_noboot; static int debug;
@@ -90,10 +90,10 @@ module_param(soft_noboot, int, 0); module_param(debug, int, 0); MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default=" - __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")"); + __MODULE_STRING(S3C2410_WATCHDOG_DEFAULT_TIME) ")"); MODULE_PARM_DESC(tmr_atboot, "Watchdog is started at boot time if set to 1, default=" - __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT)); + __MODULE_STRING(S3C2410_WATCHDOG_ATBOOT)); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, "
@@ -406,7 +406,7 @@ static struct watchdog_ops s3c2410wdt_ops = { static struct watchdog_device s3c2410_wdd = { .info = &s3c2410_wdt_ident, .ops = &s3c2410wdt_ops, - .timeout = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME, + .timeout = S3C2410_WATCHDOG_DEFAULT_TIME, }; /* interrupt handler code */
@@ -600,12 +600,12 @@ static int s3c2410wdt_probe(struct platform_device *pdev) wdt->wdt_device.timeout); if (ret) { started = s3c2410wdt_set_heartbeat(&wdt->wdt_device, - CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); + S3C2410_WATCHDOG_DEFAULT_TIME); if (started == 0) dev_info(dev, "tmr_margin value out of range, default %d used\n", - CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); + S3C2410_WATCHDOG_DEFAULT_TIME); else dev_info(dev, "default timer value is out of range, " "cannot start\n");
--
2.9.3