On Fri, Mar 10, 2017 at 3:59 PM, Troy Kisky
[off-list ref] wrote:

On 3/9/2017 8:52 PM, Steve Longerbeam wrote:

quoted

There is a pin conflict with GPIO_6. This pin functions as a power
input pin to the OV5642 camera sensor, but ENET uses it as the h/w
workaround for erratum ERR006687, to wake-up the ARM cores on normal
RX and TX packet done events. So we need to remove the h/w workaround
to support the OV5642. The result is that the CPUidle driver will no
longer allow entering the deep idle states on the sabrelite.

This is a partial revert of

commit 6261c4c8f13e ("ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC
                      interrupt.")
commit a28eeb43ee57 ("ARM: dts: imx6: tag boards that have the HW workaround
                      for ERR006687")

Signed-off-by: Steve Longerbeam <redacted>
---
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 8413179..89dce27 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi

@@ -270,9 +270,6 @@
      txd1-skew-ps = <0>;
      txd2-skew-ps = <0>;
      txd3-skew-ps = <0>;

How about

+#if !IS_ENABLED(CONFIG_VIDEO_OV5642)

Or maybe just create a new device tree for using the camera, like
imx6q-sabrelite-camera.dts.

This way we can keep the FEC erratum for the existing sabrelite dtb's.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html