Re: [PATCH] ARM: dts: Add dra7 iodelay configuration and use it for MMC
From: Tony Lindgren <tony@atomide.com>
Date: 2017-02-14 18:51:21
Also in:
linux-gpio, linux-omap
Nishanth, * Tony Lindgren [off-list ref] [161230 10:50]:
Add dra7 iodelay configuration and use it for MMC.
I just noticed that this patch should probably be: From: Nishanth Menon <nm@ti.com> I think I just added the description to the patch. Can you please confirm and reply with your Signed-off-by if that's the case? Regards, Tony
quoted hunk ↗ jump to hunk
Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 21 ++++++++++++++++++++- arch/arm/boot/dts/dra7.dtsi | 8 ++++++++ include/dt-bindings/pinctrl/dra.h | 4 ++++ 3 files changed, 32 insertions(+), 1 deletion(-) --- And ere are the related dts changes.diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi@@ -190,6 +190,25 @@ >; }; }; + +&dra7_iodelay_core +{ + mmc2_iodelay_3v3_conf: mmc2_iodelay_3v3_conf { + pinctrl-pin-array = < + 0x18c A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A19_IN */ + 0x1a4 A_DELAY_PS(265) G_DELAY_PS(360) /* CFG_GPMC_A20_IN */ + 0x1b0 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A21_IN */ + 0x1bc A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A22_IN */ + 0x1c8 A_DELAY_PS(287) G_DELAY_PS(420) /* CFG_GPMC_A23_IN */ + 0x1d4 A_DELAY_PS(144) G_DELAY_PS(240) /* CFG_GPMC_A24_IN */ + 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */ + 0x1ec A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A26_IN */ + 0x1f8 A_DELAY_PS(120) G_DELAY_PS(180) /* CFG_GPMC_A27_IN */ + 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */ + >; + }; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>;@@ -452,7 +471,7 @@ status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_default>; + pinctrl-0 = <&mmc2_pins_default &mmc2_iodelay_3v3_conf>; vmmc-supply = <&vdd_3v3>; bus-width = <8>;diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi@@ -401,6 +401,14 @@ reg = <0x40d00000 0x100>; }; + dra7_iodelay_core: padconf@4844a000 { + compatible = "ti,dra7-iodelay"; + reg = <0x4844a000 0x0d1c>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <2>; + }; + sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>;diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h --- a/include/dt-bindings/pinctrl/dra.h +++ b/include/dt-bindings/pinctrl/dra.h@@ -73,5 +73,9 @@ */ #define DRA7XX_CORE_IOPAD(pa, val) (((pa) & 0xffff) - 0x3400) (val) +/* DRA7 IODELAY configuration parameters */ +#define A_DELAY_PS(val) ((val) & 0xffff) +#define G_DELAY_PS(val) ((val) & 0xffff) + #endif-- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html