[PATCH V2 2/2] ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
From: Stefan Wahren <hidden>
Date: 2017-02-12 19:38:48
Also in:
linux-pm
Subsystem:
the rest · Maintainer:
Linus Torvalds
As suggested by Eduardo Valentin this adds the thermal zone for the bcm2835 SoC with its single thermal sensor. We start with the criticial trip point and leave the cooling devices empty since we don't have any at the moment. Signed-off-by: Stefan Wahren <redacted> --- Changes in V2: - add missing thermal-sensor-cells property - change gpu-thermal to cpu-thermal arch/arm/boot/dts/bcm283x.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index a3106aa..4dc74f6 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi@@ -19,6 +19,25 @@ bootargs = "earlyprintk console=ttyAMA0"; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <80000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>;
@@ -394,6 +413,7 @@ compatible = "brcm,bcm2835-thermal"; reg = <0x7e212000 0x8>; clocks = <&clocks BCM2835_CLOCK_TSENS>; + #thermal-sensor-cells = <0>; status = "disabled"; };
--
1.7.9.5