[PATCH 1/2] dt-bindings: Add thermal zone to bcm2835-thermal example
From: Stefan Wahren <hidden>
Date: 2017-02-04 14:16:26
Also in:
linux-pm
Subsystem:
open firmware and flattened device tree bindings, the rest, thermal · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Rafael J. Wysocki, Daniel Lezcano
Add a thermal zone in order to make the example complete. Signed-off-by: Stefan Wahren <redacted> --- .../bindings/thermal/brcm,bcm2835-thermal.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
index 474531d..680aca9 100644
--- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt@@ -10,6 +10,25 @@ clocks: Phandle of the clock used by the thermal sensor. Example: +thermal-zones { + gpu_thermal: gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <80000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; +}; + thermal: thermal@7e212000 { compatible = "brcm,bcm2835-thermal"; reg = <0x7e212000 0x8>;
--
1.7.9.5