Re: [PATCH 4/8] drm/sun4i: add support for sun8i DE2 mixers and display engines
From: Rob Herring <robh+dt@kernel.org>
Date: 2017-02-24 13:31:36
Also in:
dri-devel, linux-arm-kernel, linux-clk, lkml
On Wed, Feb 22, 2017 at 2:09 PM, Maxime Ripard [off-list ref] wrote:
Hi, On Wed, Feb 22, 2017 at 11:23:06PM +0800, Icenowy Zheng wrote:quoted
Allwinner have a new "Display Engine 2.0" in there new SoCs, which comes in a new "Display Engine" (mixers instead of old backends and frontends). Add support for the mixer on Allwinner V3s SoC; it's the simplest one. Signed-off-by: Icenowy Zheng <redacted> ---
[...]
quoted
diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/sun4i/sun8i_mixer.c new file mode 100644 index 000000000000..9427b57240d3 --- /dev/null +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c@@ -0,0 +1,417 @@ +/* + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> + * + * Based on sun4i_backend.c, which is: + * Copyright (C) 2015 Free Electrons + * Copyright (C) 2015 NextThing Co + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <drm/drmP.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_fb_cma_helper.h> +#include <drm/drm_gem_cma_helper.h> +#include <drm/drm_plane_helper.h> + +#include <linux/component.h> +#include <linux/reset.h> +#include <linux/of_device.h> + +#include "sun8i_mixer.h" +#include "sun4i_drv.h" + +#define SUN8I_DRAM_OFFSET 0x40000000PHYS_OFFSET?
PHYS_OFFSET is not portable. __pa(PAGE_OFFSET) instead. If your DMA addresses are different from CPU addresses (i.e. have some offset), then use "dma-ranges" in DT. Rob _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel